I acknowledge that the product(s) being purchased () was/were designed and intended for closed course competition use only. The product(s) is/are neither designed nor intended for use on public roads or land and is against Federal and State regulations to do so. By proceeding with this purchase, I , agree to only use the product(s) for closed course competition.
A TST Hyperpack - industry-leading products for your 2015+ Yamaha YZF-R3 bundled together and discounted 10%. The only place to find all these parts packaged together and saving you money at the same time:
Be sure to check out the description for an explanation of certain item options (the Halo-GTR Flushmounts especially)!
Want to add an exhaust to your order and take your Hyperpack to the next level? Check out the "Exhaust Options" tab to find exhausts from Toce, Graves Motorsports, and Yoshimura.
Applications:
Yamaha YZF-R3 | 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Coupon codes are not valid for this bundle.
EACH ITEM BUNDLED WITH 10% DISCOUNT
WANT TO ADD AN EXHAUST TO YOUR HYPERPACK? Find an exhaust from Toce Performance, Graves Motorsports, Yoshimura that suits your Yamaha R3 best in the "Exhaust Options" tab. Add your favorite to the cart and then add some extra performance and sound to your Yamaha R3! Bundle Features
DescriptionUpgrade your 2015+ Yamaha R3 with the hottest parts from TST Industries while saving 10% on the bundle total. You receive everything you need to improve the style and performance of your R3. Our TST Elite-1 Fender Eliminator and LED Integrated Tail Light cleans up the tail section, while the HALO GTR LED Flushmount Turn Signals ditch the bulky stock pumpkin style signals up front. You can personalize your kit by selecting the lens color of the tail light and turn signals, the running light color of your front turn signals, and the fender eliminator setup. The TST Hyperpack is the best way to upgrade your Yamaha R3 from front to back while saving 10% on every part in the bundle! NON U.S. BUYERS: Please note, all products have been verified and designed to fit on North American model motorcycles. If you're located outside of North America, your electrical connections may be different resulting in you needing to splice or make small modifications. If you are purchasing an LED flasher relay, please verify the pin configuration before purchasing. North American models models require a two pin flasher relay, but some international models require a four pin flasher relay. Our standard bracket is designed for U.S. plates and fits a hole spacing of 5 to 6.1 inches with 5mm hardware, while the adjustable bracket fits a hole spacing of 5.2 to 6.29 inches with 5mm hardware. It is your responsibility to verify fitment before making your purchase. This kit is only verified to fit the North American models. COUPON CODES NOT VALID FOR THIS ITEM Please note this item is not DOT approved and may not comply with the laws and regulations in your area. See our Terms & Conditions for more information.
LED Integrated Tail Light InstallationHalo-GTR LED Flushmount Signal InstallationFender Eliminator InstallationFlash Relay Installation
|
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov