I acknowledge that the product(s) being purchased () was/were designed and intended for closed course competition use only. The product(s) is/are neither designed nor intended for use on public roads or land and is against Federal and State regulations to do so. By proceeding with this purchase, I , agree to only use the product(s) for closed course competition.
Toss those bulky stock signals in the spare parts bin and upgrade to the LED Front Flushmount Turn Signal on your 2017+ Suzuki GSX-R1000. Pair these with a set of Suzuki turn signal plug adapters for an easy, plug-and-play installation (plug adapters are sold as a pair).
SOLD AS A PAIR
NON U.S. BUYERS: Riders outside of the U.S.A. have reported wire harness compatibility issues with our suggested TST Turn Signal Plug Adapters. Please verify that the Signal Plug Converters are compatible with the wiring harness on your specific bike. It is your responsibility to verify fitment before making a purchase.
Applications:
Suzuki GSX-R1000 | 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Click to Show Products ▼
Product Feature VideoFeatures
DescriptionUpgrade your 2017+ Suzuki GSX-R1000 by ditching those stock front signals and replacing them with the TST Industries LED Front Flushmount Signals. Each unit consists of two high-output SMD-style LEDs that combine with the revised internal lens elements to provide over 90 degrees of light spread. These signals come with spacer that can be used during the installation process to allow for an easier installation. Be sure to check out the installation video in the Videos tab to watch Bart take you through the entire process, step by step. Our signals terminate in bullet connectors, which are not plug and play alone. If you wish to have a plug and play installation, meaning no wire cutting, splicing, or soldering, pair these signals with our Suzuki Plug Adapters so you can spend less time worrying about wires and more time riding. PLUG ADAPTERS: Turn Signal Plug Adapters do NOT allow our signals to have a running light function. Our signals do not and cannot have a running light function. They do enable a simple and easy plug-and-play installation. Also not that plug adapters are sold in pairs. FLASH RATE: Installing aftermarket LED lights may make your signal flash rate speed up. Purchasing a flasher relay will correct this problem. NON U.S. BUYERS: UK and AUS riders have reported wire harness compatibility issues with our suggested TST Turn Signal Plug Adapters. Please verify that the Signal Plug Converters are compatible with the wiring harness on your specific bike. It is your responsibility to verify fitment before making a purchase. INSTALLATION: These LED signals make use of the forward mounting hole in the fairing well. That hole will need to be expanded to 25/64 in. This does NOT impact your ability to revert back to stock signals if you ever wish to in the future. Not sure if you need a flasher relay? CLICK HERE to find out! Please note this item is not DOT approved and may not comply with the laws and regulations in your area. See our Terms & Conditions for more information.
Installation on a 2017 GSX-R1000
Q: Do these signals require any wiring or splicing?
A: The signals come with bullet type connectors which do need to be wired into your harness. If you wish to have a plug-and-play installation instead, you will need to add the plug adapters to your order. Q: Do plug adapters give me running lights? A: NO. These signals cannot, will not, and will never, ever have running lights. This has nothing to do with the addition of plug adapters. Plug adapterss ONLY make the installation plug-and-play. They will not give you running lights. Nothing will. Did we mention there are no running lights? We did. But you'll still ask. Q: Do these signals have running lights? A: No. See above. Q: After installing these, my taillight stopped working correctly! Why? A: If you are custom wiring your signals without the use of plug adapters you must not connect the running light and signal circuit together into the signals. This will throw off the functionality of the entire signaling system on your bike. These signals are for use with only the signaling circuit. Q: Do I need a flasher relay? A: Installing aftermarket LED lights may cause your signals to flash faster than the OEM speed. Purchasing one of our LED flasher relays will correct this problem. Q: How long will it take for me to receive this once I order it? A: Our handling time is 1-2 business days, and the shipping time varies based on the shipping method selected. To learn more about shipping times, please see the articles in our Terms & Conditions regarding domestic and international shipping here. Q: I'm located outside of the United States. Will I have to pay duties on this item? A: Some countries charge additional fees when a package is imported and delivered to the recipient. We have no way of knowing or estimating what these fees will be. It is the buyer's responsibility to cover these additional costs. Q: What is your return and warranty policy? A: Please read over our policies thoroughly on our terms and conditions page BEFORE making your purchase. TST Industries Terms and Conditions |
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov