Despite the minor issues, this is a kit any CBR600RR owner should purchase. The sound and aggressive look of the exhaust and awesome appearance of the lights makes this a must have.

Advantages: This is truly a very good kit. There were some minor complications here and there, but for the most part the install went smooth. Once everything was installed and fairings replaced, I was shocked at how much the ascetics of the bike had changed for the better. As another reviewer suggested, this is how the bike should look coming out of the factory. I installed a K&N air filter and a Power Commander 5 along with this kit. The Power Commander is a must have if any modification is done to the air entering or exiting the system. Performance will be compromised otherwise.
I was concerned about the flush mount lights reducing the visibility other drivers have for me. This cannot be since the TCT lights are considerably brighter than the OEM lights. Additionally, I left the relay off to allow for the high flash rate to increase visibility even more. All electronics worked without having to jerry-rig anything and there were no connectivity issues. Everything worked right the first time.



Disadvantages: Mid pipe issues: there was some difficulty in removing the stock exhaust. The guy in the video removed the heat shield directly above the pipe and just below the seat after he yanked out the stock exhaust. In my case, I could not do this. There was not enough space between the pipe and the heat shield to slide the pipe up and off the cat pipe at the C clamp. To remedy this, I removed the heat shield directly below the seat before continuing any attempt to remove the exhaust. Once this was done, the OEM pipe slipped right off. Also, the TST C clamp would not allow the nut to be threaded after the mid pipe was installed. I had to attach the clamp with the nut before installing the Toce mid pipe and then tighten the nut.
Fender eliminator issue: the license plate holder either makes contacts with the mid pipe or the hanger where the springs are attached to the exhaust. I didn’t want the mid pipe to get scratched up with the vibration, so I elected to have the plate holder rest against the hanger, which effectively renders the hanger and springs useless. This issue caused me to have to set the TST Stealth light off center to avoid mid pipe contact with the electronics/wiring of the light. As stated and seen in the video, the plate holder is designed for adjustability and customization. This is true, but no matter what configuration I tried there was contact of some kind with either directly to the mid pipe or the spring hanger.

Excellent quality, easy-to-install....I'm very satisfied with these. They look amazing!!! GREAT JOB TST!!!

I got the whole pack installed, and wasn't difficult at all, just took a bit of time. I really like how it cleaned up the bike, but I'm not sure how I feel about the flush mount front signals. On the one hand the smoke makes them disappear on my blacked out r3, but on the other hand the running lights with the smoked lens leave a lot to be desired. Smoked with hyper white looks like a half-dead flashlight to me. Probably will have to take out the running lights even though I was really looking forward to them. Maybe I'll use a LED strip underneath somewhere?

Everything was just as described, very happy with the purchase.

Rear spools are great for getting the wheel off the ground.
Fork sliders were a breeze to install.
Frame sliders, just as simple. Minor trimming on the left hand side of the bike (about a half a quarters size) Very clean for a set of "cut" sliders.
I ordered the blue bar ends, color was a bit off from the picture and didn't match my bike well. Little bit of black rattle can work and they blended right in.

Advantages: Easy to install and detailed instructions
Very clean and high quality materials


Disadvantages: None worth mentioning

This lights look awesome on this bike. Kinda wish I would have gotten the running light option now. Install is super easy.

Advantages: Smaller profile. Doesnt flap around when riding at high speeds.

Disadvantages: None

Excellent purchase! Not sure why the FZ/MT 07 doesn’t come with some type of rear support for general maintenance. These TST Industries Rear spools do the job. Very well built, slide right into position with little to no effort in about 5 min. They offer multiple color spools to meet your style of color pattern of your bike. Customer service is just as good as the product. Jessica was awesome and very helpful with giving info on the status of the order, applying military discount. Great experience, would purchase from in future. Thanks guys.

This is he very first mod/change to my bike I’ve ever done. The videos helped me out so much I felt comfortable buying the product, along with the relay, and brackets for my license plate eliminator.
I feel so good knowing this company sells you only what you need, and helps you out. Awesome company and products!!!!!!

Advantages: Videos and great products.

Disadvantages: None found except get more items for a Kawasaki ninja.

These both look and fit incredibly well. Took about 5 minutes to install with a torque wrench and ratchet set, and add a solid amount of protection to the engine casings.
The material used is pretty thick slabs of CNC'd aluminum, which would absolutely protect better than the stock engine case in the event of a crash.

Advantages: Easy to install
Look sleek and understated
Thick metal for solid protection
Moderate heat-soaking effect to help cool engine case

Anyone with a Grom understands why one would want to quickly delete those hideous factory signals and this piece does exactly that. Very well fabricated and looks 1000x better then the OEM product. Very pleased with the final result.

Advantages: Integrated signals, flashing brake warning, sleek and really compliments the bike changing the appearance all together.

Disadvantages: I would have given the product 5 starts but my only complaint is the OEM brake light is brighter. This product isn't dull by any means but just expected more light output then OEM.

Purchased these on a recommendation from a friend and his dads MT. These look great, feel great and fit up very easily, hopefully I dont need to use them but if they do, I have no doubt they will hold up to the task.