I acknowledge that the product(s) being purchased () was/were designed and intended for closed course competition use only. The product(s) is/are neither designed nor intended for use on public roads or land and is against Federal and State regulations to do so. By proceeding with this purchase, I , agree to only use the product(s) for closed course competition.
The TST MECH-EVO Turn Signals are an evolution of our popular MECH-GTR turn signals that adapt the design and technology for pod signal style mounting. The flat base design and non-interchangeable built-in running light create more upgrade possibilities and mounting solutions than ever before, enabling bikes that would have required extensive modification to mount our MECH-GTR signals the ability to upgrade their bike with ease.
With both Hyper White and Red running lights available, you can upgrade the front and rear of your ride with MECH-EVO style and brightness!
Sold as a pair
Please note that the running light color is not able to be changed.
Features
DescriptionAfter countless requests to make our popular MECH-GTR turn signals fit more motorcycle models, we continued to run into issues with the mounting method of those signals interfering with OEM parts. So we went back to the drawing board and took inspiration from our pod signal lineup to create our MECH-EVO LED Pod Turn Signals. We combined the styling of our MECH-GTR signal with the stud-based mounting method of our pod signals, enabling easy installation in situations previously thought impossible. The MECH-EVO's changed mounting method also updates the running light feature, which is now built-in and non-interchangeable, but brighter than ever! We utilize the same signaling technology that has made these so popular, ensuring you get the brightness that TST has become known for. The wires of each signal terminate in male bullet connectors and can be paired with the appropriate harness converter, if needed, for an easy plug-and-play installation. SPECIAL NOTE: We recommend only installing the Red version on the rear of your motorcycle. Not intended for front use when mounting surface is recessed within a fairing. REAR MOUNTING: Pair these with our Pod Signal To License Plate Mounting Kit to easily mount for rear signal use. WIRING: These signals connect via male bullet connectors. If that's different from your bike's plug, don't stress! We've got you covered. Check out our wire harness converters for a simple plug-and-play wiring job. No cutting, splicing, or soldering required. We currently have wire harness converters for Yamaha, Honda, Kawasaki, and Suzuki. Navigate to your specific motorcycle to find the exact harness converter for your motorcycle. RUNNING LIGHT: These turn signals feature a built-in running light circuit and are fully compatible with your OEM running light. If you do not have an OEM running light circuit, you will need to tap into a power source to provide one if you want to take advantage of that feature, which can easily be done with our TST Running Light Circuit Connection Kit. Because the running light circuit is already built into the signal, the use of a TST Running Mate is not needed and is not compatible. FLASH RATE: Installing aftermarket LED lights will make your signals flash faster than OEM speed. You can correct this problem by using the TST plug-and-play LED flasher relay. Please navigate to your specific motorcycle to find the correct relay unit for your bike. Not sure if you need a flasher relay? CLICK HERE to find out! Some Honda motorcycles will cut off the base running light while the turn signal is activated and reactive the running light once the signal function is switched off. Please note this item is not DOT-approved and may not comply with the laws and regulations in your area. See our Terms & Conditions for more information.
Installation on Suzuki GSX-8R
Q: Do these have a running light?
A: Yes - These LED turn signals feature a running light. If your motorcycle has an OEM running light circuit, simply connect the corresponding running light wire to the MECH-EVO running light wire to retain your stock running light feature. Q: Can I pair these with the TST Running Mate running light module? A:No - These signals are not compatible with the TST Running Mate. Q: Do these come with wire harness converters? A: No - Please navigate to your specific model's category to find the appropriate harness converters to pair with these signals for a plug-and-play installation. Q: How long will it take for me to receive this once I order it? A: Our handling time is 1-2 business days, and the shipping time varies based on the shipping method selected. To learn more about shipping times, please see the articles in our Terms & Conditions regarding domestic and international shipping here. Q: I'm located outside of the United States. Will I have to pay duties on this item? A: Some countries charge additional fees when a package is imported and delivered to the recipient. We have no way of knowing or estimating what these fees will be. It is the buyer's responsibility to cover these additional costs. Q: What is your return and warranty policy? A: Please read over our policies thoroughly on our terms and conditions page BEFORE making your purchase. TST Industries Terms and Conditions |
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov