I acknowledge that the product(s) being purchased () was/were designed and intended for closed course competition use only. The product(s) is/are neither designed nor intended for use on public roads or land and is against Federal and State regulations to do so. By proceeding with this purchase, I , agree to only use the product(s) for closed course competition.
TST Industries Turn Signal Plug Adapters upgrade enable you to plug in aftermarket signals into your Kawasaki motorcycle wire harness without doing any cutting, splicing, or soldering - simply plug them in and you're done!
Tech Tip EpisodeFeatures
DescriptionThese Kawasaki turn signal plug adapters enable you to install aftermarket signals into your Kawasaki OEM wire harness without doing any custom wiring. These plug adapters will connect into the OEM signal plugs on Kawasakis that have the two-conductor plugs. If you don't have running lights in the signals, then you will need the 2-to-2 model. You need to check this before ordering. They terminate in insulated 3.5mm female bullet connectors, ensuring compatibility with most aftermarket signals that have 3.5mm male bullet connectors. If you intend to use these along with the TST Industries brand signals, rest easy, as we guarantee the fit between the signals and plug adapter.
|
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov