Attention: You are purchasing closed course competition Product(s)

I acknowledge that the product(s) being purchased () was/were designed and intended for closed course competition use only. The product(s) is/are neither designed nor intended for use on public roads or land and is against Federal and State regulations to do so. By proceeding with this purchase, I , agree to only use the product(s) for closed course competition.

If an ECU tune was purchased, please send your unmodified and undamaged OEM ECU to TST Industries, located at 623 Pleasant St, Lake Helen, FL 32744.

* All fields are required Close Aknowledgement
x

FREE SHIPPING OPTION FOR DOMESTIC ORDERS:

U.S. customers are offered a free shipping option for orders with a discounted subtotal greater than $150.00 (before taxes applied). The order's shipment destination must reside within the United States of America. The free shipping options still utilize our standard postage providers and 3rd party shipping companies. Does not apply to large items such as exhausts, stands, and bodywork shipping. All terms and conditions that apply to normal orders will continue to apply to orders with a free shipping option.

NO RESTOCKING FEES:

An item returned within 30 days of purchase, that includes an accurate RMA#, in a perfectly new, unopened condition, and that complies with our other return policies, will not be charged a restocking fee.

MOST QUESTIONS ABOUT THIS PRODUCT CAN BE ANSWERED ON THIS PAGE.

The most common product related questions are answered in the tabs section on this page. Be sure to carefully read through the "Product Details", "In the Box", and "FAQs" tabs. In addition, a lot of our products have comprehensive videos demonstrating installations and product features. You can find those videos in the "Videos" tab.

Note: Some product pages may not have all the tabs mentioned above. Please read through all the available tabs to find the answers to your questions. If you still need assistance, please use the "ASK A QUESTION ABOUT THIS PRODUCT" button below the tabs section.
NO ADDITIONAL COST: You pay at the time of checkout and never have to worry again.
COVERAGE: Our Limited Extended Warranty starts on the date of purchase. It covers all manufacturer defects for our TST Exclusive products. (Products manufactured by us with the exception of our WORX products)
EXPERT HELP: As always our team is here to help. If you’re unsure about this warranty or if your product is eligible, feel free to reach out to us and we can help answer any questions you may have!
PRODUCT ELIGIBILITY: TST will offer our Limited Extended Warranty on all products manufactured by TST Industries.
EASY CLAIMS PROCESS: Simply click the “Contact Us” page and fill out the “Returns Form” to begin the warranty process. Once our team receives your email and initiates the RMA, you can send your product back to us and we will repair/replace the product at no cost as long as a manufacturer defect is found. What qualifies as a manufacturer defect? Check out our Terms and Conditions for some examples!

TST LED Integrated Tail Light & Fender Eliminator System V2 for Suzuki DRZ400S / DRZ400SM

  • TST Fender Eliminator LED Integrated Tail Light System Version 2 for the 2000+ Suzuki DRZ400S / DRZ400SM
  • Standby mode. (shown with Stealth License Plate Light, sold separately)
  • 66 bright LEDs. Brake mode shown. (shown with Stealth License Plate Light, sold separately)
  • TST Fender Eliminator LED Integrated Tail Light system for the Suzuki DRZ400S / M.
  • LED Integrated Tail Light shown in smoked.
  • LED Integrated Tail Light shown in clear.
  • What's included.
  • Plug and play installation fender eliminator system. (shown with Stealth License Plate Light, sold separately)
  • Ditch the old bulky fender. (shown with Stealth License Plate Light, sold separately)
  • Upgrade to the Adjustable license plate bracket to choose the license plate angle that fits your style.
  • Example showing the adjustment range of the upgraded adjustable license plate bracket.

TST LED Integrated Tail Light & Fender Eliminator System V2 for Suzuki DRZ400S / DRZ400SM

TST LED Integrated Tail Light & Fender Eliminator System V2 for Suzuki DRZ400S / DRZ400SM

We went back to the drawing board and created a Version 2 of this kit that features our new LED integrated tail light and an easy-to-install mounting process. This kit enables you to ditch your stock fender, tail light, and signals for one sleek and low-profile unit that really cleans up the tail section of your DRZ.

Want to add 3 different brake light modes to this tail light? Add our TST Brake Light Modulator for Select TST Tail Lights to your order and enable standard, pulsar, and strobe alert light modes to this TST Integrated Tail Light.

Applications:

Suzuki DRZ400S / DRZ400SM | 2000 - 2024


Please note that an LED Flasher Relay or Load Balancing Resistors are needed for this tail light to flash properly. Only one LED flasher relay is required per motorcycle. Both sold separately.

SKU
2000 +/DR-Z400S/Suzuki
TST LED Integrated Tail Light & Fender Eliminator System V2 for Suzuki DRZ400S / DRZ400SM
 
Price: $134.99
Select Lense Color
Select license plate bracket
Quantity

ATTENTION:

If buying this product as part of the Buy Together bundle below, define these options there.

Buy Together

Make an awesome bundle with your

TST LED Integrated Tail Light & Fender Eliminator System V2 for Suzuki DRZ400S / DRZ400SM

TST LED Integrated Tail Light & Fender Eliminator System V2 for Suzuki DRZ400S / DRZ400SM +
TST Suzuki 7 Pin LED Flasher Relay +
TST LED Low-Profile Universal Fit License Plate Light +
TST Brake Light Modulator for OEM & TST Integrated Tail Light Suzuki DR-Z400S/M =
$220.96

Click to Show Products
TST LED Integrated Tail Light & Fender Eliminator System V2 for Suzuki DRZ400S / DRZ400SM
TST LED Integrated Tail Light & Fender Eliminator System V2 for Suzuki DRZ400S / DRZ400SM
$134.99
Uncheck to remove Item
Buy Together For Only $220.96

Features and Installation

Adjustable bracket Installation

 

Features

  • Tail Light
    • Ducted taillight enclosure design
    • Available in smoked or clear
    • 66 Super bright LEDs
    • Built in signals
    • Perimeter lit running light
    • Plug and play - no need for wire harness converters
    • Compatible with the TST Brake Light Modulator for Select TST Tail Lights - sold separately
  • License Plate Bracket
    • Available in standard (fixed position) or adjustable
    • Standard bracket is laser cut steel with a durable black powder coat finish
    • Adjustable bracket is CNC machined from billet aluminum and features a black anodized finish
    • Precise fit

Description

If you're looking to replace your stock fender, turn signals, and dull tail light, look no further! We here at TST have developed an easy-to-install kit that combines all of those elements into one sleek and low-profile unit. Our integrated tail light is comprised of 66 super bright LEDs and features a unique perimeter lit running light and bright built in signals. Select the best license plate bracket that fits your style by choosing between our standard (fixed position) bracket or customize your license plate angle with our CNC machined aluminum adjustable bracket. Each kit is plug-and-play to ensure a quick and easy installation to get you back on your bike as soon as possible. You can look around, but this is the sleekest and sexiest kit on the market for cleaning up the tail section of your DRZ!

FLASH RATE: An LED Flasher Relay or Load Balancing Resistors are needed for this tail light to flash properly. If you don't already have an LED Flasher Relay installed on your bike and you want to avoid the hassle of wiring in load balancing resistors, check out our plug-and-play TST 7-Pin LED Flasher Relay and ensure your new LED lighting works properly. Still not sure if you want an LED Flasher Relay or Load Balancing Resistors? CLICK HERE to learn more!

NON U.S. BUYERS: Our fixed bracket is designed for U.S. plates and fits a hole spacing of 5.09 to 6.1 inches with 5mm hardware, while the adjustable bracket fits a hole spacing of 5.2 to 6.29 inches with 5mm hardware. It is your responsibility to verify fitment before making your purchase.

Please note this item is not DOT approved and may not comply with the laws and regulations in your area. See our Terms & Conditions for more information.

Featured Images

TST Fender Eliminator LED Integrated Tail Light System Version 2 for the 2000+ Suzuki DRZ400S / DRZ400SM TST Fender Eliminator LED Integrated Tail Light System Version 2 for the 2000+ Suzuki DRZ400S / DRZ400SM Standby mode. (shown with Stealth License Plate Light, sold separately) Ditch the old bulky fender and upgrade your Suzuki DRZ400S DRZ400SM to the TST Industries V2 LED Integrated Tail Light and Fender Eliminator System TST Fender Eliminator LED Integrated Tail Light System Version 2 for the 2000+ Suzuki DRZ400S / DRZ400SM features plug and play installation and incredibly bright LEDs
  • LED integrated tail light
  • Tail light mounting bracket
  • License plate bracket
  • Corrosion resistant installation hardware
  • 1 Year Warranty* (See our warranty policyhere)

Please note that an LED Flasher Relay or Load Balancing Resistors are not automatically included. If you already have an LED Flasher Relay installed, you do not need another.

*Please be aware that our 1 Year Warranty does not cover physical damage caused by off-road use.

Q: Does this light require any wiring or splicing?
A: No. This taillight comes with plugs for both the brake and signal lights. It is a direct plug and play installation.

Q: Do I have to do any cutting?
A: No - no modifications to the bike are required.

Q: What fender eliminator is included with this system?
A: You receive your choice of either our standard (fixed position) bracket or our adjustable bracket. Make your selection above before adding to your cart.

Q: Do I need a relay?
A: Installing this taillight will cause your signals to stop flashing. The optional load balancing resistors can be wired in fix the signal flash rate. If you want a plug and play option so you don't have to do any wiring, then you will want to purchase the relay. We highly recommend purchasing the relay, especially if you do not feel comfortable doing wiring on your bike.

Q: Is it bright?
A: Yes - our taillights are extremely bright. This particular taillight is designed with 58 super bright LEDs so you can be sure your light will be visible during the daytime as well as at night. This applies to both our smoked and clear lens.

Q: How long will it take for me to receive this once I order it?
A: Our handling time is 1-2 business days, and the shipping time varies based on the shipping method selected. To learn more about shipping times, please see the articles in our Terms & Conditions regarding domestic and international shipping here.

Q: I'm located outside of the United States. Will I have to pay duties on this item?
A: Some countries charge additional fees when a package is imported and delivered to the recipient. We have no way of knowing or estimating what these fees will be. It is the buyer's responsibility to cover these additional costs.

Q: What is your return and warranty policy?
A: Please read over our policies thoroughly on our terms and conditions page BEFORE making your purchase.
TST Industries Terms and Conditions
warning

WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov

Reviews

Customer Reviews:

Average customer rating:
 
(23 reviews)  

5 Most useful customer reviews (see all reviews):
john walters
Jul 3, 2017
this tail light kit is the CATS ASS PERIOD!!!!!!!!! it was packaged very well installation was a breeze (so easy a caveman could do it) the fit and finish is top notch and it is extremely bright and the wire length was spot on I would recommend getting the license plate light and the flasher relay to complete the package

Advantages: it is truly a plug and play kit that is super easy to install and gives the bike a really clean look on back and it is really

Disadvantages: the only disadvantage it has it does not flash a few times then go solid when you hit the brakes this is the only con with this package
Loading...Was the above review useful to you? Yes (8) / No (0)
Zach
Mar 25, 2018
Great looking tail light and super easy to install. Don’t get this if you intend on doing wheelies. I scrapped one and It destroyed the light as they designed I.T to stick out of the fender. Thus I wasted my money haha! If they made a re location bracket that brought I.T in a little further I’d buy for sure

Advantages: Slick looking, bright

Disadvantages: Sticks out of fender. Dirt gets caught in lense super easy and is a pain to keep clean
Loading...Was the above review useful to you? Yes (6) / No (3)
Lars Voss Gundestrup
Apr 9, 2016
Fast delivery even to Europe

Advantages: Perfect size and shape for a tidy taillight assembly, total plug'n play, paired with stealth number plate light.

Disadvantages: Wiring for the taillight should be a couple inches longer to prevent unesessesary stress to the wires.
Loading...Was the above review useful to you? Yes (6) / No (4)
Ryan
May 11, 2017
Beautiful integrated tail, very easy to install. Purchased as a bundle with the flasher relay and adjustable bracket and led licence plate light. This thing is bright! when side by side with my pals drz with his edge eliminator tail. Mine is the cats ass. Hes now thinking of changing his to one from TST. Very well done to the guys and gals at TST for creating this beauty of a light. Shipped to Ontario Canada super fast and hassle free. Will recommend this light to all DRZ owners.

Advantages: Sleek, compact, ease of install, super bright, beautifully made, great product!

Disadvantages: when using the licence plate light paired with the adjustable plate bracket you can only angle it up with the top pointing at about 10:30-11. The light hits the integrated light. But other than that no biggie as its a perfect angle. If you chose not to use the led plate light, the bracket adjusts as described. This is the only flaw i found.
Loading...Was the above review useful to you? Yes (4) / No (1)
Rob Stone
Jul 31, 2019
This is a fantastic product!! Much cleaner look than the stock rear fender on the DRZs that was designed in 1974! Easy install with plug and play wiring. Install is even easier thanks to the TST YouTube Instructional video.

Advantages: Cleaner looking rear end with a lower profile. More modern looking with bright LED lights. Lower power draw is nice as well. People can't say my bike has a lot of junk on its trunk anymore!

Disadvantages: slightly harder to clean when you get a muddy fender.....worth it!
Loading...Was the above review useful to you? Yes (2) / No (2)

 
Dear Customer, TST Industries' website uses cookies to allow us to better understand how the site is being used and to enhance your shopping experience. By continuing to use this site, you consent to this policy. Click to learn more.