Attention: You are purchasing closed course competition Product(s)

I acknowledge that the product(s) being purchased () was/were designed and intended for closed course competition use only. The product(s) is/are neither designed nor intended for use on public roads or land and is against Federal and State regulations to do so. By proceeding with this purchase, I , agree to only use the product(s) for closed course competition.

If an ECU tune was purchased, please send your unmodified and undamaged OEM ECU to TST Industries, located at 623 Pleasant St, Lake Helen, FL 32744.

* All fields are required Close Aknowledgement
x

FREE SHIPPING OPTION FOR DOMESTIC ORDERS:

U.S. customers are offered a free shipping option for orders with a discounted subtotal greater than $150.00 (before taxes applied). The order's shipment destination must reside within the United States of America. The free shipping options still utilize our standard postage providers and 3rd party shipping companies. Does not apply to large items such as exhausts, stands, and bodywork shipping. All terms and conditions that apply to normal orders will continue to apply to orders with a free shipping option.

NO RESTOCKING FEES:

An item returned within 30 days of purchase, that includes an accurate RMA#, in a perfectly new, unopened condition, and that complies with our other return policies, will not be charged a restocking fee.

MOST QUESTIONS ABOUT THIS PRODUCT CAN BE ANSWERED ON THIS PAGE.

The most common product related questions are answered in the tabs section on this page. Be sure to carefully read through the "Product Details", "In the Box", and "FAQs" tabs. In addition, a lot of our products have comprehensive videos demonstrating installations and product features. You can find those videos in the "Videos" tab.

Note: Some product pages may not have all the tabs mentioned above. Please read through all the available tabs to find the answers to your questions. If you still need assistance, please use the "ASK A QUESTION ABOUT THIS PRODUCT" button below the tabs section.
NO ADDITIONAL COST: You pay at the time of checkout and never have to worry again.
COVERAGE: Our Limited Extended Warranty starts on the date of purchase. It covers all manufacturer defects for our TST Exclusive products. (Products manufactured by us with the exception of our WORX products)
EXPERT HELP: As always our team is here to help. If you’re unsure about this warranty or if your product is eligible, feel free to reach out to us and we can help answer any questions you may have!
PRODUCT ELIGIBILITY: TST will offer our Limited Extended Warranty on all products manufactured by TST Industries.
EASY CLAIMS PROCESS: Simply click the “Contact Us” page and fill out the “Returns Form” to begin the warranty process. Once our team receives your email and initiates the RMA, you can send your product back to us and we will repair/replace the product at no cost as long as a manufacturer defect is found. What qualifies as a manufacturer defect? Check out our Terms and Conditions for some examples!

TST LED HALO-1 Flushmount Turn Signals for Honda CBR600RR 2007-2012

  • What's Included in the TST LED HALO-1 Front Flushmount Turn Signals for the Honda 2007-2012 - Clear Lens
  • What's Included in the TST LED HALO-1 Front Flushmount Turn Signals for the Honda 2007-2012 - Smoked Lens
  • TST LED HALO-1 Front Flushmount Turn Signals on the 2007-2012 CBR600RR. (Hyper White HALO shown)
  • TST LED HALO-1 Front Flushmount Turn Signals on the 2007-2012 CBR600RR. (Orange HALO shown)
  • TST LED HALO-1 Front Flushmount Turn Signals on the 2007-2012 CBR600RR. (Blue HALO shown)
  • TST LED HALO-1 Front Flushmount Turn Signals on the 2007-2012 CBR600RR. (Red HALO shown)
  • Features bright amber LEDs that activate for signaling.
  • Features a flush fit within the fairing well.

TST LED HALO-1 Flushmount Turn Signals for Honda CBR600RR 2007-2012

TST LED HALO-1 Flushmount Turn Signals for Honda CBR600RR 2007-2012

These Halo-1 Flushmount Turn Signals fit flush within your fairing and provide a glowing halo effect in running light mode in a variety of colors.

Applications: Honda CBR600RR 2007, 2008, 2009, 2010, 2011, 2012

SKU
2007 - 2012/CBR600RR/Honda
TST LED HALO-1 Flushmount Turn Signals for Honda CBR600RR 2007-2012
 
Price: $59.99
Select Lens Color & HALO Color
Quantity

ATTENTION:

If buying this product as part of the Buy Together bundle below, define these options there.

Features

  • Smoked or clear lens
  • 5 available color options
  • Plug and play
  • Glowing running light

Description

The Halo-1 technology is another big innovation by TST Industries. Two years in the making, this product took a lot of R&D to design just right. With the most advanced optics in the flushmount signal market, a shape that is contoured to the outer geometry of the fairing and fits perfectly within the signal well, and true plug-and-play installation, this system has proven to be a hit! The running light function has a glowing halo (patent pending) in a color of your choice. During signaling, the halo element turns off to eliminate color bleed. The signaling circuit packs three 1W amber LED chips that fire a super bright signal through a lens packed with light dispersing hexagonal dome optical elements. As a result, you have a very bright and noticeable signal lamp that can be easily seen from the front and side. The installation takes just minutes by simply plugging the signal into the harness, pushing it into the fairing well, and fastening it down with the provided hardware.

Not sure if you need a flasher relay? CLICK HERE to find out!

INTERNATIONAL BUYERS: The plug-and-play installation has been confirmed on American models where the OEM plug has three conductors. If you are ordering from outside of South and North America, please check your signal plugs first. In case your plug has only two conductors, please follow the instructions found in the FAQ tab for installation.

Please note this item is not DOT approved and may not comply with the laws and regulations in your area. See our Terms & Conditions for more information.

  • Set of HALO-1 Flushtmount Turn Signals (left and right signal)
  • Installation Hardware
  • Installation instructions located HERE
  • 1 Year Warranty (See our warranty policy here)

Updated Installation

Installation

Q: Do these signals require any wiring or splicing?
A: No - these signals are completely plug and play.

Q: The signals have a 3 pin connector but my signals only have 2. How do I install?
A: Some bikes outside of North America will only have 2 pins. For bikes with a two pin signal plug you would take the pins out of the three conductor plug on the halo-1 signals. The wires in our plug have crimped on metal connectors. You will insert the halo-1 black wire crimp into your plug position that has the green wire. Then the halo-1 red wire crimp will go into the remaining slot on your bike's plug. Use electrical tape around the plug with the pins in it and make a nice tight electrical tape junction. You will be left with the green wire from the halo-1 signals. If you leave it disconnected you will not have the running light. At this point you can run a wire from the positive lead on your low beam headlight to each of the green wires on the halo-1's. This will give you running lights when the bike is on, and they will shut off with the bike. You can also opt to run a wire to the positive terminal on the battery and use a fuse and a switch on that connection. The fuse should be immediately next to the battery, and the switch should be accessible somewhere for you so you can switch the halo-1 running light on and off at your will.

Q: Do these signals have running lights?
A: Yes! In a variety of color options.

Q: Do I need a flasher relay?
A: Installing aftermarket LED lights may cause your signals to flash faster than the OEM speed. Purchasing one of our LED flasher relays will correct this problem.

Q: How long will it take for me to receive this once I order it?
A: Our handling time is 1-2 business days, and the shipping time varies based on the shipping method selected. To learn more about shipping times, please see the articles in our Terms & Conditions regarding domestic and international shipping here.

Q: I'm located outside of the United States. Will I have to pay duties on this item?
A: Some countries charge additional fees when a package is imported and delivered to the recipient. We have no way of knowing or estimating what these fees will be. It is the buyer's responsibility to cover these additional costs.

Q: What is your return and warranty policy?
A: Please read over our policies thoroughly on our terms and conditions page BEFORE making your purchase.
TST Industries Terms and Conditions
warning

WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov

Reviews

Customer Reviews:

Average customer rating:
 
(6 reviews)  

5 Most useful customer reviews (see all reviews):
Guest
I've bought this item for my CBR600RR 07'. Regret, met installation difficulties, as my bike is Japaneese spec with 2 wires instead if three in this item. So, I had to cut it and splice 2+3.
I think you should clarify this matter in product description in order to avoid any customer's surprise!
Loading...Was the above review useful to you? Yes (12) / No (19)
Jordan
Mar 8, 2017
Nice but have some issues. First off these turn signals look great and function perfect! However there is a big issue with them, the stud that comes out the back for mounting held in with plastic that likes to fracture. I've already replaced one of mine due to the stud just falling off. I've worked on bikes and cars for years and I was well aware ahead of time that you don't torque down on plastic and things of that nature so I literally screwed the nut on with a socket in between my fingers (no ratchet). I put them on finger tight with a drop of blue Loctite for added security. I was very careful to make sure no Loctite got onto the plastic because I know with some plastics it can degrade and weaken them. I'm currently trying to figure out a way that I can fix them somehow because I really like the way the look but if they don't stay mounted/break they're basically worthless. I have a number of TST Industries's products on my bike and have had no issues with any but this one. Would I still recommend getting this set? Yes but I think a solution would be to put some kid of hard drying adhesive around the base of the stud plastic to add strength (like JB weld). With that said I love the look but they're pointless if they wont stay attached to my bike.
=======
TST INDUSTRIES MESSAGE
=======
Jordan, our customer support team is going to contact you to see if we can find a proper resolution for you. We have an updated signal mounting design for select color HALO's that can hopefully work better for you.

Advantages: Bright Vibrant Colors on both the halo and turn signal

Very small form factor and truly flush mount

Wiring is sturdy with good protective covering

The smoked lens is perfect balance of dark and still visible when lit

Disadvantages: The mounting stud is too weak. Held in by plastic and the plastic likes to fracture very easily.
Loading...Was the above review useful to you? Yes (11) / No (2)
Guest
Another high quality product, and plug and play application made installation a breeze! Signal & halo light output is great and gives you a truly unique look!
Loading...Was the above review useful to you? Yes (3) / No (2)
Jeff
Apr 22, 2019
These look great and where super easy to install. As long as you read the instructions that say don't over tighten the bolts your golden.

Advantages: Very easy to install

Disadvantages: None
Loading...Was the above review useful to you? Yes (2) / No (1)
Guest
great product
Loading...Was the above review useful to you? Yes (2) / No (0)

 
Dear Customer, TST Industries' website uses cookies to allow us to better understand how the site is being used and to enhance your shopping experience. By continuing to use this site, you consent to this policy. Click to learn more.