I acknowledge that the product(s) being purchased () was/were designed and intended for closed course competition use only. The product(s) is/are neither designed nor intended for use on public roads or land and is against Federal and State regulations to do so. By proceeding with this purchase, I , agree to only use the product(s) for closed course competition.
This integrated taillight removes your rear stock fender lighting and replaces it with this all inclusive taillight and signals unit.
Applications:
Honda CBR1000RR / ABS / SP 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Please note that an LED Flasher Relay or Load Balancing Resistors are needed for this tail light to flash properly. Only one LED flasher relay is required per motorcycle. Both sold separately.
Click to Show Products ▼
Installation on 2012+ modelInstallation on 2008 - 2011 modelFeatures
DescriptionThis light plugs right into the stock harness and installs in minutes. All connectors are included for a true plug-and-play installation. The lens features honeycomb-dome diffuser elements that disperse the light evenly across the lens surface rather than transmitting point lights directly from the LEDs. Like other genuine TST Industries products, these lights have our logo molded into the casing and lens components letting our customers know they purchased a trusted brand. FLASH RATE: An LED Flasher Relay or Load Balancing Resistors are needed for this tail light to flash properly. If you don't already have an LED Flasher Relay installed on your bike and you want to avoid the hassle of wiring in load balancing resistors, check out our plug-and-play TST Gen2 LED Flasher Relay and ensure your new LED lighting works properly. Still not sure if you want an LED Flasher Relay or Load Balancing Resistors? CLICK HERE to learn more! NON U.S. BUYERS: If you are purchasing an LED flasher relay, please verify the pin configuration before purchasing. North American models models require a two pin flasher relay, but some international models require a four pin flasher relay. It is your responsibility to verify fitment of these items before making your purchase. Want to use this LED Integrated Tail Light in conjunction with dedicated turn signals? CLICK HERE to learn how. Please note this item is not DOT approved and may not comply with the laws and regulations in your area. See our Terms & Conditions for more information.
Please note that an LED Flasher Relay or Load Balancing Resistors are not automatically included. If you already have an LED Flasher Relay installed, you do not need another. Q: Does this light require any wiring or splicing?
A: No. This taillight comes with plugs for both the brake and signal lights. It is a direct plug and play installation. Q: Do I have to do any cutting? A: No. Q: Are there signals built in? A: Yes. The signals are integrated into the taillight capsule. Q: Do I need a relay? A: You will likely need to slow down your flash rate once you install aftermarket LED lights. The load balancing resistors can be wired in to slow down the flash rate. If you want a plug and play option so you don't have to do any wiring, then you will want to purchase the relay. We highly recommend purchasing the relay, especially if you do not feel comfortable doing wiring on your bike. Q: Is it bright? A: Yes - our taillights are extremely bright. This particular taillight is designed with 80 super bright LEDs so you can be sure your light will be visible during the daytime as well as at night. This applies to both our smoked and clear lens. Q: I can't find the rear signal connectors on my harness. Are they the wrong ones? A: During the integrated taillight installation procedure, you will likely be removing the rear fender with all its lighting components. When you unplug the sub harness going to the fender from its main 4 conductor plug for the purpose of removing the fender, you are removing the sub harness containing the signal plugs off of the bike. After fender removal, you will need to disassemble the fender, remove that sub harness, and place it back in the bike. The sub harness contained within the fender terminates in the 4 conductor plug on one end, and has the left and right signal plugs that will connect into your integrated taillight as well as a license plate light connector on the other end. Q: How long will it take for me to receive this once I order it? A: Our handling time is 1-2 business days, and the shipping time varies based on the shipping method selected. To learn more about shipping times, please see the articles in our Terms & Conditions regarding domestic and international shipping here. Q: I'm located outside of the United States. Will I have to pay duties on this item? A: Some countries charge additional fees when a package is imported and delivered to the recipient. We have no way of knowing or estimating what these fees will be. It is the buyer's responsibility to cover these additional costs. Q: What is your return and warranty policy? A: Please read over our policies thoroughly on our terms and conditions page BEFORE making your purchase. TST Industries Terms and Conditions |
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov