I acknowledge that the product(s) being purchased () was/were designed and intended for closed course competition use only. The product(s) is/are neither designed nor intended for use on public roads or land and is against Federal and State regulations to do so. By proceeding with this purchase, I , agree to only use the product(s) for closed course competition.
Kawasaki Signal Plug Converters enable you to plug in aftermarket signals into your harness without doing any wiring.
Tech Tip EpisodeFeatures
DescriptionThese converters enable you to plug in aftermarket signals into your harness without doing any wiring. These connectors will plug into the OEM signal harness plugs on late Kawasakis that have the two conductor plugs. If you don't have running lights in the signals, then you will need the 2-to-2 model. You need to check this before ordering. They terminate in insulated female bullet connectors on the end opposite to the plug with 9 inches (22cm) of wire. If you intend to use these along with the TST Industries brand signals the fit between the signals and converter is guaranteed.
|
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov