The MECH-GTR lights already make the ZH2 look nice and with running lights it looks really cool, especially at night. Worth the extra 15usd.

Advantages: Looks very cool at night and makes the bike look more "premium".

Disadvantages: No real instructions on how to set them up for a ZH2 regarding what wire to posi-tap.

Look great on my 2016 R3, I was a little worried the red would be too light but it matches the color of my bike perfect.

Advantages: Good quality, inexpensive bar ends that’ll help protect your bike if you lay ‘er down.

Disadvantages: Could just be me but I feel that there’s a bit more vibration in the handlebars than when I had the stock bar end weights. Definitely not bad enough to be a deal breaker though

Absolutely loved this product. Programming is easy the look is just great. Fits perfectly, replacing stock.

Advantages: Simple, plug and play.

Disadvantages: Received a Check Engine Light due to not using resistors.

Plugs right in no issues. It's great that you can control your flasher speed as well with this! Got mine on strobe to really grab peoples attention of my intent to turn.

Like that it comes in different colors, covering the bolt.

Advantages: Covers the mounting bolt adding some style with the color options.

Disadvantages: Only clips in and can easily come off when riding. I only have had the frame sliders for 3 weeks and lost the original caps that came with them, ordered two more sets, and already lost one side from one of the new sets. No matter how I install them. I'll leave them off for now and might look into another route for sliders as I'm not happy with those as well. Bummer

I have a 2017 fz09 with a yoshimera fender eliminator so I bought 2 kits with wire connectors, 1for front and on the back I switched the signal brackets side to side and put the other set on back. They worked great but you must change the flasher that I also purchased here, overall it looks so much better and works great, on back I put just a very small amount of black silicone around the edges between the light and brackets to keep them from moving

Advantages: They look so much better than stock and they don’t stick out so far

Disadvantages: Didn’t really see any disadvantages but you do need to get the flasher but that would be the case with any led turn signals

A straight forward install that doesn’t take too long at all either. The only thing that had me scratching me head was the license plate mount and the lack of room between the signal light threads and the bolt threads that hold the bracket in place. There’s really not a lot of room to work as the lights and mounting bolt damn near touch. Since the kit I got came with 6 washers I ended up doubling up the washers on the front of the license plate (basically made them spacers) to push to bolt further outward to give me more room behind the plate where the signal light comes through. One washer and the nut on the backside and it fit snuggly and didn’t feel like a ‘jerry rig’. The included Signal Plug Adapters allow this project to truly be a plug and play install. The Smoke BL6 lights I got are pretty slick looking and super bright. Like, my god those are bright signal lights, bright. The bright amber LED’s definitely set themselves apart from the red glow of your running/brake light.

Advantages: Super bright LED’s make no mistake your intention to turn.
Easy plug and play installation makes me feel like I know what I’m doing for once.


Disadvantages: -The license plate bracket can be a little tricky when you’re trying to tighten down the nut on the signal light and trying to keep it straight, even and flat. It’s easy to have one light lined up perfectly and the other looking a bit more up or down, like an iguana’s eye balls.
-Can’t be used in conjunction with the TST Programable and Sequential Tail Light AND utilizing its signal light function. You can still use that same tail light for running/brake lights, but you sacrifice utilizing the tail lights signal function. No way to split and splice to use both tail light signals and a separate set of signals.

Bought these about a week ago and installed them today, very sleek and nice looking.

Advantages: Better than those ugly ear looking signal lights.

Disadvantages: Cannot be seen from the front, only the side which makes turning at a uncontrolled intersection dangerous. They need to stick out a little more. On a 2018 Cbr650f they are indebted into the fairing.

The flasher relay is 100% needed. Even with resistors on the rear integrated signals, the fronts will not flash. The cheap "clip in" resistors will work.
The nylon washer should be larger. It tends to flex and not seat properly. Works fine once positioned well, but it'd be nice to see a proprietary washer designed for the Grom mounts. Other than that, the lights are great quality and really bright.

Advantages: Cheap
Looks good
Bright

Disadvantages: Harnesses are an additional cost (why not put the OEM style connector on instead of the bullet connectors?).
Flasher relay is a must.
Cheap installation hardware.

Great looking tail light and super easy to install. Don’t get this if you intend on doing wheelies. I scrapped one and It destroyed the light as they designed I.T to stick out of the fender. Thus I wasted my money haha! If they made a re location bracket that brought I.T in a little further I’d buy for sure

Advantages: Slick looking, bright

Disadvantages: Sticks out of fender. Dirt gets caught in lense super easy and is a pain to keep clean