TST LED Low-Profile Universal Fit License Plate Light

This little light packs a punch! Very easy to install! No splicing/soldering required! Would recommend to anyone who wants to give the cops one less reason to pull you over!

Advantages: So easy to install, it almost does it on its own. Wiring is super simple and the sticker patch is incredibly sticky!

Disadvantages: If the plate has a lip on it, the sticky part doesn't get a full contact stick. Make sure you flatten a section for maximum contact.

Very easy to install with the connectors provided, light is very bright! Very high quality! Not the cheap Chinese lights you see on eBay. I bought 2 setl! 1 for my R1and 1 for my 1000RR!

Advantages: Bright! Sleek! Easy to install!

Disadvantages: ????????‍♂️

Too bad the TST tail lights don’t have a white light on the bottom to light up the license plate. Could have saved $20 and not cluttered the small space under my seat with wire connectors.

Advantages: Very bright

Disadvantages: Mine was not shipped with the small red screw on wire connectors like the video. The TST tail lights should come with plugs already installed in the wiring harnesses with matching connectors on the License plate LED wires. Wish I would have at least had the red screw on connectors.

Ludicrously bright light with a super easy mounting method. Just tear away the backing strip on the adhesive, place it between the plate and the mounting bracket, and run the wire up into the compartment.

Note: The vampires are easy to use but fiddly. Make sure to apply a reasonable amount of pressure to the exposed wire into the cap to get it to seat.

For the Ninja 650 models 2016-2019 the blue wire is your running light.

Advantages: - Extremely bright
- Easy mounting
- Slim profile

Disadvantages: None

Bright, easy install, plenty of wire, everything included.

Advantages: Ease of installation; Wire taps included

Not much to say; it's bright as hell, maybe too bright. Easy to install with the wire taps provided, and even easier to clamp in-between your license plate and the mount. Wire management is the only unknown with your individual setup, but is easily made simple with a couple zip-ties.

Advantages: Cops will see your license plate from a mile away with this light.

Disadvantages: Cops will see your license plate from a mile away with this light.

Super Easy Install on my Honda Monkey without any Problems

Advantages: Pretty straightforward

Disadvantages: None

Very nice light. Super bright, clean, and easy to install.

Advantages: Bright, easy to install.

Disadvantages: None.

I intstalled this today and it was super easy and very bright.

Advantages: Easy install super bright

Disadvantages: None

Excellent value. SUPER bright. You actually get a lot more LED then what the application calls for.

I would purchase this product again, but with a caveat (see disadvantages below).

Details:
I wanted to use a license plate frame, so I ended up notching the top of the frame with a Dremel to fit the light the way I wanted. If you use the product as intended, license plate only with the light bar adhered to the back of the plate, then it's a very straight forward install.

There would be more mounting flexibility if the double sided tape was not applied from the factory and came loose in the packaging. I was thinking about adhering the light to the fender eliminator bracket itself instead of the license plate.

Advantages: -SUPER bright LEDs
-Decently long cables
-Easy to mount if used as intended

Disadvantages: -SUPER bright LEDs that can possibly blind drivers behind you if the light is mounted > ~40* to the ground