After seeing soo many reviews and YouTube videos. I finally jumped at this. Had the previous owner of my 07 CBR600RR not jacked up the wiring, install would have been 20 minutes at most. Once installed, it really cleans up the rear end. Highly recommend this and the Lowering links. You want quality? This is it.

Advantages: Bright
Easy to install
Perfect mod


Disadvantages: None

I just have one thing to say: Awesome!!! Excellent product quality, excellent packaging, It took only 5 days to arrived. Very professional. For sure I will keep ordering to TST.

Advantages: Easy installation and guide.

Disadvantages: None

Well it works exactly as described out of the box. Using this relay with flush mount front signals on my 09 FZ6R. I'm absolutely happy and now I thinking of adding a set of led rear signals.

Advantages: I works and you can adjust the flash rate.

Disadvantages: It doesn't come included with all led signal kits.

I absolutely love how my R3 is looking with this new integrated tail light! This was a very easy installation thanks to the videos.

I am still waiting for the halo flush mounts to come out so I can complete the look on my bike.

Thank you to the team at TST!



Advantages: Ease of installation -

Disadvantages: None

I bought this along with the integrated tail light. It seemed as though everything was going ok and not taking too long to get through the disassembly of the motorcycle. I was working on putting this fender eliminator together and found that the screw did not want to go into the mount that the license plate pivots on. I was able to get the screw to go in from one side, but not the other. I had the exact same experience with both pivot points. Because I do not own an tap and die set and I didn't want to put the motorcycle back together and try to send the kit back for replacement, I set about to try to make it work. I was able to hold the pivot bracket in some pliers and work the screw through from the other side until I was able to force past whatever the problem was. Eventually, after quite a while, I was able to get the screw to go in properly. I highly recommend you attempt to put the bracket together before you take your motorcycle apart so that you will know if there will be any problems.

I also ordered the stealth license plate light kit to go with this. Because I still have the paper plate from the dealer, I left the plastic dealer plate frame on it for additional support. With the frame on it, the stealth light is all the way up against the bottom of the motorcycle which makes it so that I am unable to adjust the angle of the plate. Maybe when I get the actual plate and remove the frame it will pivot properly. Keep this in mind if you want to use a decorative plate frame.

Then there is the close out that covers the old screw holes. It looks nice, but I don't understand the high cost of that little piece of metal.

Overall I think that the price of this Elite-1 Fender Eliminator it a little too high and maybe there need to be a few kinks worked out of it.

Excellent value. SUPER bright. You actually get a lot more LED then what the application calls for.

I would purchase this product again, but with a caveat (see disadvantages below).

Details:
I wanted to use a license plate frame, so I ended up notching the top of the frame with a Dremel to fit the light the way I wanted. If you use the product as intended, license plate only with the light bar adhered to the back of the plate, then it's a very straight forward install.

There would be more mounting flexibility if the double sided tape was not applied from the factory and came loose in the packaging. I was thinking about adhering the light to the fender eliminator bracket itself instead of the license plate.

Advantages: -SUPER bright LEDs
-Decently long cables
-Easy to mount if used as intended

Disadvantages: -SUPER bright LEDs that can possibly blind drivers behind you if the light is mounted > ~40* to the ground

Excellent product and very fast delivery. I received my order in three days. The installation was completely trouble-free, it took me about an hour to install the complete kit, rear fender eliminator w/led tail light, front flush mount signals, and flasher relay.
This product is super easy to install, thanks to being completely "plug and play". This is why I ordered this kit over all the others out there, and it works perfectly! The LED tail light is super bright, which is a plus. Blinkers are also very bright.

Advantages: Eliminates the huge, ugly mud flap thing and plate holder. Eliminates protruding turn signals. Very, very easy to install! Works as advertised, and fit and finish is perfect. The entire kit (front signals, tail light, flasher relay) is exceptionally light weight. This is a big advantage on a dual sport bike. Also it makes your bike look so much better. The guys at TST have put together a great product that definitely enhances your dual sporting experience.

Disadvantages: None that I can think of.

Great integrated tail light to enhance visibility of you and your bike when stopping and turning. Bright LED is a must when owning a bike. No other way to go when looking for aftermarket lightening. TST has very informative videos showing you step by step of how to install. Had no problem what so every with fitment into the tail section.

Literally the best sounding exhaust you can buy for your cbr600rr. Has throaty roar that lets everyone know your bike isn't an average bike. Not to mention it makes the bike look way better and more aggressive than stock look.

Advantages: Great fitment
Looks great
Best aftermarket exhaust hands down.

Disadvantages: Rather expensive but easily happy paying it for the sound and look it gave the bike.

Canadian buyer. 5 stars, they sent it in 48 hours as stated. Ordered the fender eliminator, the rear flashers, the stealth LED plate light and the relay so it won't blink fast

Advantages: Good fit, seems solid, bright blinkers and plate light, easy installation but still took me 2 hours because was running inside to watch the video to make sure everything was all right and started over because i had installed the bracket the wrong way

Disadvantages: When signaling, it takes around 1 second before the LED actually starts flashing, no big dead, maybe i can just accelerate the relay timer. The package took 17 calendar days to arrive. Had to pay 28$CAD customs fee upon arrival. Must drill (Quebec) plate for good fitment, as advertised but it still looks good with the provided washers