I acknowledge that the product(s) being purchased () was/were designed and intended for closed course competition use only. The product(s) is/are neither designed nor intended for use on public roads or land and is against Federal and State regulations to do so. By proceeding with this purchase, I , agree to only use the product(s) for closed course competition.
This relay will fix your flash rate problem caused by aftermarket signal lights and/or integrated tail light. If your signal lights flash too fast or do not flash at all, this part is your solution!
Only ONE relay is needed per motorcycle.
Tech Tip Episode Explaining Relays and ResistorsFeatures
DescriptionIf your signal lights flash too fast or have stopped flashing completely, this part is your solution! It piggybacks on your OEM relay and plugs into the leads that can be accessed in the OEM relay plug under the left mid fairing. This component works with the following signal configurations:
The relay comes preset to 85 cycles per minute. You can alter the flash rate to make it faster or slower. If you slip off the grey cover you can access an adjuster that will enable you to change the flash rate to your liking. INTERNATIONAL BUYERS: This relay is designed to be an add on to the North American 9-pin relay that comes standard on these bikes. If you are outside of the U.S. please check that your OEM relay matches the North American model as shown in our videos. We cannot guarantee fitment for our international customers. IT IS YOUR RESPONSIBILITY TO VERIFY FITMENT BEFORE MAKING YOUR PURCHASE. RELAY FUNCTIONALITY NOTE: A moment of rapid flash during initial signal activation of a ride cycle is normal. Click HERE to see a video demonstration of normal signal behavior.
Installation |
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov