I acknowledge that the product(s) being purchased () was/were designed and intended for closed course competition use only. The product(s) is/are neither designed nor intended for use on public roads or land and is against Federal and State regulations to do so. By proceeding with this purchase, I , agree to only use the product(s) for closed course competition.
Toss the bulky stock front signals for a set of sleek LED Flushmount Turn Signals. With a mix of clear and smoked lens elements, two high-output SMD-style LEDs in each signal, and over 90 degrees of light spread, these flush mount turn signals provide a modern look and pack a punch.
Add a pair of TST Signal Plug Adapters to your order for a simple plug-and-play installation that doesn't require any custom wiring (North American models only - non-U.S. residents please read below).
These signals are "signal function only", meaning they do not feature a running light function. If you wish to retain your stock running light, add our TST Running Mate to your order for an easy-to-install solution. The Running Mate is designed specifically to provide a running light / DRL function to single circuit signals such as these LED Flushmount Turn Signals.
Applications:
SOLD AS A PAIR
Click to Show Products ▼
2024+ MT-09 Installation2021-2023 MT-09 InstallationFeatures
DescriptionGet rid of the large stock turn signals on your Yamaha and upgrade to a set of sleek LED Flushmount Turn Signals for added style and customization. Each turn signal is comprised of 2 high-output amber SMD-style LEDs and features a mix of smoked and clear lens elements for a stealthy appearance with unparalleled brightness. With visibility at the core of our design, the external and internal lens geometry was engineered to provide over 90 degrees of light spread, ensuring visibility wasn't a concern with the flush form factor. These signals replace your front signals and sit flush with the mounting surface, creating a low-profile appearance that doesn't detract from your Yamaha's design. Each signal terminates in an industry-standard male bullet connector, but by adding the appropriate set of plug adapters, you can turn them into a simple plug-and-play installation that doesn't require any custom wiring. NON U.S. BUYERS: Please be aware that the recommended plug adapter in the "Make An Awesome Bundle" option is for US customers only. International buyers with Yamaha motorcycles mentioned in the applications looking to add a plug adapter to their order should purchase THIS PLUG ADAPTER. It is your responsibility to verify plug compatibility before purchase. RUNNING LIGHT: These turn signals are "signal-only" indicators, meaning that a running light function is not built-in. But, if you wish to retain your existing stock running light function, simply pair these signals with our TST Running Mate and appropriate 3-3 plug adapter for a plug-and-play solution. PLUG ADAPTERS: TST Plug Adapters enable an easy plug-and-play installation that does not require any cutting, splicing, or soldering wires. We highly recommend adding them to your order for a painless installation. FLASH RATE: Installing aftermarket LED lights may make your signal flash rate speed up. Purchasing a flasher relay will correct this problem. Not sure if you need a flasher relay? CLICK HERE to find out! Please note this item is not DOT approved and may not comply with the laws and regulations in your area. See our Terms & Conditions for more information.
Q: Do these signals require any wiring or splicing?
A: The signals come with bullet-type connectors which do need to be wired into your harness. If you wish to have a plug-and-play installation instead, you will need to add the plug adapter to your order. Q: What is the Running Mate? A: These Flushmount Turn Signals do NOT feature a running light, meaning they are signal-function ONLY. Because of that, we produced our TST Running Mate that provides a running light function to "signal-only" turn signals. This works by utilizing the existing running light harness on your Yamaha. If your bike does not feature a running light circuit, such as many international MT models, but you wish to add one, check out our TST Running Mate and Circuit Connection Kit to find the parts you need to wire in a running light circuit and obtain DRL / running light functionality on your bike. Q: Do plug adapters give me a running light? A: No, plug adapters are ONLY for providing a plug-and-play installation, meaning you don't need to cut, splice, or solder any wiring. Q: After installing these, my taillight stopped working correctly! Why? A: If you are custom wiring your signals without the use of plug adapters you must not connect the running light and signal circuit together into the signals. This will throw off the functionality of the entire signaling system on your bike. These signals are for use with only the signaling circuit. Q: Do I need a flasher relay? A: Installing aftermarket LED lights may cause your signals to flash faster than the OEM speed. Purchasing one of our LED flasher relays will correct this problem. Q: How long will it take for me to receive this once I order it? A: Our handling time is 1-2 business days, and the shipping time varies based on the shipping method selected. To learn more about shipping times, please see the articles in our Terms & Conditions regarding domestic and international shipping here. Q: I'm located outside of the United States. Will I have to pay duties on this item? A: Some countries charge additional fees when a package is imported and delivered to the recipient. We have no way of knowing or estimating what these fees will be. It is the buyer's responsibility to cover these additional costs. Q: What is your return and warranty policy? A: Please read over our policies thoroughly on our terms and conditions page BEFORE making your purchase. TST Industries Terms and Conditions |
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov