I acknowledge that the product(s) being purchased () was/were designed and intended for closed course competition use only. The product(s) is/are neither designed nor intended for use on public roads or land and is against Federal and State regulations to do so. By proceeding with this purchase, I , agree to only use the product(s) for closed course competition.
Upgrade your Kawasaki KLX 230 with a modern and incredibly bright LED Integrated Tail Light and Fender Eliminator System. Our plug-and-play kit comes with all of the components you need to give your KLX the upgrade it needs to stand out from the crowd!
Want to add 3 different brake light modes to this tail light? Check out the TST Brake Light Modulator for Kawasaki Tail Lights for an easy to install solution that enables standard, pulsar, and strobe alert light modes on this TST LED Integrated Tail Light.
Applications:
Please note that an LED Flasher Relay or Load Balancing Resistors are needed for this tail light to flash properly. Only one LED flasher relay is required per motorcycle. Both sold separately.
Click to Show Products ▼
InstallationLED Integrated Tail Light Features
License Plate Bracket Features
DescriptionDitch the oversized stock fender, tail light, and turn signals in one easy-to-install upgrade! Our Fender Eliminator and LED Integrated Tail Light System takes the tail section of your Kawasaki KLX230 / KLX230 SM to the modern era by transforming the rear with a sleek, low-profile, and super bright setup. The integrated tail light consists of 66 super bright LEDs and features a unique perimeter-lit running light with bright built-in rear turn signals. Our Standard license plate bracket features a fixed angle and is constructed of laser-cut stainless steel with a black powder coat finish, but if you wish to customize the angle of your license plate, upgrade your kit to our black anodized CNC machined aluminum adjustable bracket. Both brackets are designed to be strong and sturdy without adding unnecessary bulk to your Kawasaki, ensuring your plate stays in place while creating a clean and modern aesthetic. Our LED integrated tail light is completely plug-and-play so installation is a quick and easy process that gets you back on your Kawasaki KLX 230 / SM as soon as possible. There's no modification required for installation and absolutely zero wire cutting, splicing, or soldering. Our OEM-style plugs connect directly with the OEM wire harness for a hassle-free installation. FLASH RATE: An LED Flasher Relay or Load Balancing Resistors are needed for this tail light to flash properly. If you don't already have an LED Flasher Relay installed on your bike and you want to avoid the hassle of wiring in load balancing resistors, check out our plug-and-play TST Gen2-F LED Flasher Relay and ensure your new LED lighting works properly. Still not sure if you want an LED Flasher Relay or Load Balancing Resistors? CLICK HERE to learn more! NON U.S. BUYERS: Our fixed bracket is designed for U.S. plates and fits a hole spacing of 5.09 to 6.1 inches with 5mm hardware, while the adjustable bracket fits a hole spacing of 5.2 to 6.29 inches with 5mm hardware. It is your responsibility to verify fitment before making your purchase. Please note this item is not DOT approved and may not comply with the laws and regulations in your area. See our Terms & Conditions for more information.
Please note that an LED Flasher Relay or Load Balancing Resistors are not automatically included. If you already have an LED Flasher Relay installed, you do not need another. **Please be aware that our 1 Year Warranty does not cover physical damage caused by off-road use. Q: Does this light require any wiring or splicing?
A: No. This tail light is completely plug-and-play, meaning there is no need for wire cutting, splicing, or soldering. Just plug it in and you're done. Q: Do I have to do any cutting? A: No - no permanent modifications to your Kawasaki KLX 230 are required. Q: Do I need a relay? A: Installing this tail light will cause your signals to flash at a faster rate than what is considered to be normal. The optional load balancing resistors can be wired in to fix the problem, or if you want a plug-and-play option that doesn't require any wiring, then you will want to purchase the relay. In our opinion, we highly recommend purchasing the relay, especially if you do not feel comfortable doing wiring on your bike. Q: Is it bright? A: Yes - our tail lights are extremely bright. This particular tail light is designed with 66 super bright LEDs so you can be sure your light will be visible during the daytime as well as at night. This goes for both our clear and smoked lens options. Q: How long will it take for me to receive this once I order it? A: Our handling time is 1-2 business days, and the shipping time varies based on the shipping method selected. To learn more about shipping times, please see the articles in our Terms & Conditions regarding domestic and international shipping here. Q: I'm located outside of the United States. Will I have to pay duties on this item? A: Some countries charge additional fees when a package is imported and delivered to the recipient. We have no way of knowing or estimating what these fees will be. It is the buyer's responsibility to cover these additional costs. Q: What is your return and warranty policy? A: Please read over our policies thoroughly on our terms and conditions page BEFORE making your purchase. TST Industries Terms and Conditions |
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov