TST LED Rear Pod Turn Signal Bundle for Yamaha TW200

Signal Feature Table

Click on the Signal Style name to learn more about each signal.

• Your choice of TST LED pod turn signals
• Available standard or sequential signal pattern
• Signals comprised of bright amber LEDs
• Includes our Pod Signal Mounting Kit
• Direct bolt-on with plug-and-play wiring for signal functions
• Reference the table above for indicator pattern and additional wiring information

Description

Upgrade your Yamaha TW200 with some added style and a ton of brightness! Each signal options mount in place of the stock units using the included hardware to provide a sturdy mounting surface. By selecting if you are installing this kit alongside the TST LED Integrated Tail Light and Fender Eliminator or not, you'll be sure to receive the right mounting hardware that will work on your setup. Each signal terminates in a male bullet connector and plugs directly into your stock wire harness, or TST Integrated Tail Light harness, getting you back out on the road sooner and not left in the garage splicing wires. MECH-EVO and Quadrix-D signals feature additional functionality that require using the included Positap connectors and wiring kit to tap into 12v switched power.

PLEASE NOTE: When installing LED rear signals with the stock tail light, we have observed the LED turn signals demonstrate a pulse effect when the signal is activated.

RUNNING LIGHT: Our signals have a single signaling circuit on board. There is not a second running light circuit and do not have that function out of the box. Our harness converters do NOT enable the running light function.

FLASH RATE & FLASHER RELAY: Installing aftermarket LED lights may make your signal flash rate speed up. Purchasing and installing our LED flasher relay will remedy this symptom. If you don't already own an LED flasher relay for your Honda, we highly recommend including one with your purchase (only one relay is needed per bike). A relay is almost always necessary for these signals to function properly.

NON U.S. BUYERS: Fitment is only confirmed for the North American model. It is your responsibility to verify electrical connector compatibility.

Not sure if you need a flasher relay? CLICK HERE to find out!

Please note this item is not DOT approved and may not comply with the laws and regulations in your area. See our Terms & Conditions for more information.