I acknowledge that the product(s) being purchased () was/were designed and intended for closed course competition use only. The product(s) is/are neither designed nor intended for use on public roads or land and is against Federal and State regulations to do so. By proceeding with this purchase, I , agree to only use the product(s) for closed course competition.
The TST Industries taillight system for the 2008 - 2016 Yamaha R6 eliminates the stock light and signals and replaces them with all inclusive taillight unit.
Applications: Yamaha YZF-R6 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Please note that an LED Flasher Relay or Load Balancing Resistors are needed for this tail light to flash properly. Only one LED flasher relay is required per motorcycle. Both sold separately.
Click to Show Products ▼
Features
DescriptionWant that racing, sleek look for your R6? This light plugs right into the stock harness and installs in minutes. We created this unit with a properly diffused lens so you do not see point lights through clear plastic, but rather a significantly more solid light from the entire capsule. This is not a cheap imitation but a well designed and manufactured taillight unit. It is the best bang for your buck and is the same quality as our other products that have met with tremendous success around the world! FLASH RATE: An LED Flasher Relay or Load Balancing Resistors are needed for this tail light to flash properly. If you don't already have an LED Flasher Relay installed on your bike and you want to avoid the hassle of wiring in load balancing resistors, check out our plug-and-play TST Gen2 LED Flasher Relay and ensure your new LED lighting works properly. Still not sure if you want an LED Flasher Relay or Load Balancing Resistors? CLICK HERE to learn more! NON U.S. BUYERS: If you are purchasing an LED flasher relay, please verify the pin configuration before purchasing. North American models models require a two pin flasher relay, but some international models require a four pin flasher relay. If purchasing a Fender Eliminator, please note that our bracket is designed for U.S. plates and fits a hole spacing of 5.4 to 6 inches with 5mm hardware. It is your responsibility to verify fitment of these items before making your purchase. Want to use this LED Integrated Tail Light in conjunction with dedicated turn signals? CLICK HERE to learn how. Please note this item is not DOT approved and may not comply with the laws and regulations in your area. See our Terms & Conditions for more information.
Please note that an LED Flasher Relay or Load Balancing Resistors are not automatically included. If you already have an LED Flasher Relay installed, you do not need another. InstallationQ: Does this light require any wiring or splicing?
A: No. This taillight comes with plugs for both the brake and signal lights. It is a direct plug and play installation. Q: Do I have to do any cutting? A: No. No cutting is required. Q: Are there signals built in? A: Yes. The signals are integrated into the taillight capsule. Q: Do I need a relay? A: You will likely need to slow down your flash rate once you install aftermarket LED lights if you have not previously installed an LED Flasher Relay. If you choose to include the load balancing resistors, they can be wired in to slow down the flash rate, but they do produce a lot of heat. If you want a plug and play option so you don't have to do any wiring, then you will want to purchase the relay. We highly recommend purchasing the relay, especially if you do not feel comfortable doing wiring on your bike. Q: Is it bright? A: Yes - our taillights are extremely bright. This particular taillight is designed with 72 super bright LEDs so you can be sure your light will be visible during the daytime as well as at night. This applies to both our smoked and clear lens. Q: How long will it take for me to receive this light once I order it? A: Our handling time is 1-2 business days, and the shipping time varies based on the shipping method selected. To learn more about shipping times, please see the articles in our Terms & Conditions regarding domestic and international shipping here. Q: I'm located outside of the United States. Will I have to pay duties on this item? A: Some countries charge additional fees when a package is imported and delivered to the recipient. We have no way of knowing or estimating what these fees will be. It is the buyer's responsibility to cover these additional costs. Q: What is your return and warranty policy? A: Please read over our policies thoroughly on our terms and conditions page BEFORE making your purchase. TST Industries Terms and Conditions |
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov