Attention: You are purchasing closed course competition Product(s)

I acknowledge that the product(s) being purchased () was/were designed and intended for closed course competition use only. The product(s) is/are neither designed nor intended for use on public roads or land and is against Federal and State regulations to do so. By proceeding with this purchase, I , agree to only use the product(s) for closed course competition.

* All fields are required Close Aknowledgement


U.S. customers are offered a free shipping option for orders with a discounted subtotal greater than $150.00 (before taxes applied). The order's shipment destination must reside within the United States of America. The free shipping options still utilize our standard postage providers and 3rd party shipping companies. Does not apply to large items such as exhausts, stands, and bodywork shipping. All terms and conditions that apply to normal orders will continue to apply to orders with a free shipping option.


An item returned within 30 days of purchase, that includes an accurate RMA#, in a perfectly new, unopened condition, and that complies with our other return policies, will not be charged a restocking fee.


The most common product related questions are answered in the tabs section on this page. Be sure to carefully read through the "Product Details", "In the Box", and "FAQs" tabs. In addition, a lot of our products have comprehensive videos demonstrating installations and product features. You can find those videos in the "Videos" tab.

Note: Some product pages may not have all the tabs mentioned above. Please read through all the available tabs to find the answers to your questions. If you still need assistance, please use the "ASK A QUESTION ABOUT THIS PRODUCT" button below the tabs section.

TST Elite-1 Fender Eliminator for Yamaha YZF R6 2006-2016

TST Elite-1 Fender Eliminator for Yamaha YZF R6 2006-2016 Laser cut steel bracket features a black powder coat finish for a stealthy and lightweight mounting solution. The Elite-1 Fender Eliminator and Undertail Closeout. Ditch the bulky stock fender for a sleek tail tidy solution from TST Industries. Proprietary design features a light weight solution to closing the gap from stock fender removal and license plate mounting. Mount your license plate in a position similar to stock. TST Industries Elite-1 Fender Eliminator tail tidy kit shown on the Yamaha R6. Clean up your 2006-2016 Yamaha R6 with TST Industries.

TST Elite-1 Fender Eliminator for Yamaha YZF R6 2006-2016

The Elite-1 fender eliminator is the next level of look and performance with a plate bracket and undertail closeout to close the gap left behind by your fender.


Yamaha YZF-R6 | 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016

SKU 06R6E1
Weight 0.50 LBS
Price: $42.99
tst email icon
Get a notification when this item is back in stock.


If buying this product as part of the Buy Together bundle below, define these options there.

Buy Together

Buy Together and

Save $2.85

TST Elite-1 Fender Eliminator for Yamaha YZF R6 2006-2016 +
TST LED Low-Profile Universal Fit License Plate Light =

Click to Show Products
TST Elite-1 Fender Eliminator for Yamaha YZF R6 2006-2016
TST Elite-1 Fender Eliminator for Yamaha YZF R6 2006-2016
Bundle Total: $54.13
*Discount applied to subtotal in shopping cart.


  • Eliminates OEM fender
  • Closes hole left behind from fender removal
  • CNC machined aluminum base
  • Laser cut and powdercoated steel bracket
  • No modifications necessary
  • Made in the USA


The Elite-1 base closes out the undertail hole left behind by the stock fender and it seals off your trunk from the outside. The internal geometry of the base fits nicely around the stock undertail contours, and provides a channel for you to run a wire to your license plate light (if you are using one). This is the sexiest looking fender eliminator kit that you can get for your Yamaha!

LICENSE PLATE LIGHT INSTALLATION NOTES: On the 2006-2007 model the light wire does not go through the slot in the bracket. It will go through the bracket in the center triangular cutout and then up into the base channel, then into the undertail. For 2008 and later please install exactly as in the video.

NON U.S. BUYERS: Our bracket is designed for U.S. plates and fits a hole spacing of 5.09 to 6.1 inches with 5mm hardware. It is your responsibility to verify fitment before making your purchase.

Please note this item is not DOT approved and may not comply with the laws and regulations in your area. See our Terms & Conditions for more information.

  • Undertail Closeout
  • License Plate Bracket
  • Installation Hardware
  • Installation instructions located HERE
  • 1 Year Warranty (See our warranty policy here)


WARNING: Cancer and Reproductive Harm -


Customer Reviews:

Average customer rating:
(6 reviews)  

5 Most useful customer reviews (see all reviews):
May 29, 2016
Great looking kit however if you are not using the intergraded flashing tail lights, don't bother. There is only enough room for wiring for the license plate light and nothing else. In MA you need separate turn signals NOT intergraded into the brake light to pass inspections. Can't use this kit with separate turn signals.

Advantages: Clean install look.

Disadvantages: No room for any other wiring such as separate turn signals. It would've been nice to have this kit and be able to run both turn signal wires along with the license plate light wire for a clean install look.
Loading...Was the above review useful to you? Yes (3) / No (0)
Ricky Greear
Jun 23, 2020
This is the only fender eliminator i found, for the r6 atleast, that looks this good. I actually replace my old one with this, due to the block off plate with wiring access for a plate light. Another product they sell that couples well. It was night and day for me. Don't regret this purchase one bit. Even already having one. If your thinking of buying this, STOP and just buy it. It's a fair price and looks dope!

Advantages: Cleans the tail up a great amount.

Disadvantages: The light gets mounted to your license plate.
Loading...Was the above review useful to you? Yes (0) / No (0)
Yony Moreno
Dec 30, 2017
This customer purchased the item at our site.
Best quality, best price and best look. On my opinion there's nothing better out there for my 06 R6. 3 days shipment to Alaska from Florida? I love it!!! Keep the great work TST team.
Loading...Was the above review useful to you? Yes (0) / No (0)
Francisco Garcia Martinez
Nov 17, 2017
Perfect fitment for my r6 08'. Choose tst because the quality and it feels like OEM should be.
Encaje perfecto para mi r6 08'. Estuve viendo varias opciones pero este modelo de tst es el que mejor calidad y mas integrado queda en la moto. Apenas se ve. A mí parecer así es como debería ser el portamatriculas original cuando la compras.
Thank you Tst for built it

Advantages: Best looking for your r6 you can find
Perfectly integrated
You don't see any wire
Great quality

Disadvantages: My friends will copy me
Loading...Was the above review useful to you? Yes (0) / No (0)
Tynan Bullock
Aug 2, 2017
I bought this to replace my existing fender eliminator that was on the bike when I originally bought it. The old eliminator was still bulky and was heavier. With this new eliminator it has a cleaner and simple. I have this installed with the TST universal license plate light. I believe this is the best fender eliminator out there on the market.

Advantages: Cleaner look
Sheds weight off the bike

Disadvantages: None
Loading...Was the above review useful to you? Yes (0) / No (0)

Dear Customer, TST Industries' website uses cookies to allow us to better understand how the site is being used and to enhance your shopping experience. By continuing to use this site, you consent to this policy. Click to learn more.