Attention: You are purchasing closed course competition Product(s)

I acknowledge that the product(s) being purchased () was/were designed and intended for closed course competition use only. The product(s) is/are neither designed nor intended for use on public roads or land and is against Federal and State regulations to do so. By proceeding with this purchase, I , agree to only use the product(s) for closed course competition.

If an ECU tune was purchased, please send your unmodified and undamaged OEM ECU to TST Industries, located at 623 Pleasant St, Lake Helen, FL 32744.

* All fields are required Close Aknowledgement
x

FREE SHIPPING OPTION FOR DOMESTIC ORDERS:

U.S. customers are offered a free shipping option for orders with a discounted subtotal greater than $150.00 (before taxes applied). The order's shipment destination must reside within the United States of America. The free shipping options still utilize our standard postage providers and 3rd party shipping companies. Does not apply to large items such as exhausts, stands, and bodywork shipping. All terms and conditions that apply to normal orders will continue to apply to orders with a free shipping option.

NO RESTOCKING FEES:

An item returned within 30 days of purchase, that includes an accurate RMA#, in a perfectly new, unopened condition, and that complies with our other return policies, will not be charged a restocking fee.

MOST QUESTIONS ABOUT THIS PRODUCT CAN BE ANSWERED ON THIS PAGE.

The most common product related questions are answered in the tabs section on this page. Be sure to carefully read through the "Product Details", "In the Box", and "FAQs" tabs. In addition, a lot of our products have comprehensive videos demonstrating installations and product features. You can find those videos in the "Videos" tab.

Note: Some product pages may not have all the tabs mentioned above. Please read through all the available tabs to find the answers to your questions. If you still need assistance, please use the "ASK A QUESTION ABOUT THIS PRODUCT" button below the tabs section.
NO ADDITIONAL COST: You pay at the time of checkout and never have to worry again.
COVERAGE: Our Limited Extended Warranty starts on the date of purchase. It covers all manufacturer defects for our TST Exclusive products. (Products manufactured by us with the exception of our WORX products)
EXPERT HELP: As always our team is here to help. If you’re unsure about this warranty or if your product is eligible, feel free to reach out to us and we can help answer any questions you may have!
PRODUCT ELIGIBILITY: TST will offer our Limited Extended Warranty on all products manufactured by TST Industries.
EASY CLAIMS PROCESS: Simply click the “Contact Us” page and fill out the “Returns Form” to begin the warranty process. Once our team receives your email and initiates the RMA, you can send your product back to us and we will repair/replace the product at no cost as long as a manufacturer defect is found. What qualifies as a manufacturer defect? Check out our Terms and Conditions for some examples!

TST LED HALO-1 Flushmount Turn Signals for Honda CBR600RR 2013+

  • TST Smoked LED HALO-1 Flushmount Turn Signals for Honda CBR600RR 2013+
  • TST Clear LED HALO-1 Flushmount Turn Signals for Honda CBR600RR 2013+
  • TST LED HALO-1 Flushmount Front Turn Signal with Hyperwhite running light on the 2013+ Honda CBR600RR.
  • TST LED HALO-1 Flushmount Front Turn Signal with Orange running light on the 2013+ Honda CBR600RR.
  • TST LED HALO-1 Flushmount Front Turn Signal with Blue running light on the 2013+ Honda CBR600RR.
  • TST LED HALO-1 Flushmount Front Turn Signal with Red running light on the 2013+ Honda CBR600RR.
  • Ditch the bulky stock signals for a front turn signals that accentuate the fairing design.
  • Bright LEDs illuminate in the center of the flushmount for turn signal functionality.
  • Choose the color that fits your Honda CBR600RR best.
  • Ditch the stock signals and upgrade your 2013+ Honda CBR600RR with TST HALO-1 LED Flushmount Turn Signals.

TST LED HALO-1 Flushmount Turn Signals for Honda CBR600RR 2013+

TST LED HALO-1 Flushmount Turn Signals for Honda CBR600RR 2013+

Upgrade your 2013+ Honda CBR600RR signals to the TST Industries HALO-1 Flushmount Turn Signals. These super bright signals feature a glowing halo running light that is available in four different colors, enabling you to customize the look of your bike while providing a sleek and modern feel to your 600RR.

 

Applications:

Honda CBR600RR / ABS 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024

SKU
2013 +/CBR600RR/Honda
TST LED HALO-1 Flushmount Turn Signals for Honda CBR600RR 2013+
 
Price: $64.99
Select Lens Color & HALO Color
Quantity

ATTENTION:

If buying this product as part of the Buy Together bundle below, define these options there.

Installation

Features

  • Designed specifically to fit the 2013+ Honda CBR600RR
  • Available in smoked or clear lens
  • LED Halo running light available in 4 colors
  • Quick and easy installation with plug-and-play wiring
  • Bright amber LED indicators

Description

The HALO-1 technology is another big innovation by TST Industries. Two years in the making, this product took a lot of R&D to design just right. With the most advanced optics in the flushmount signal market, a shape that is contoured to the outer geometry of the fairing and fits perfectly within the signal well, and true plug-and-play installation, this system has everything you need to make your bike unique and sexy. The running light function of these signals has a glowing halo (patent pending) in a color of your choice. During signaling, the Halo element turns off to eliminate color bleed. The signaling circuit packs three 1W amber LED chips that fire a super bright signal through a lens packed with light dispersing hexagonal dome optical elements. As a result you have a very bright and noticeable signal lamp that can be easily seen from the front and side. The installation takes just minutes. After you gain access behind the mid fairing all that is required is plugging the signal into the harness, pushing it into the fairing well, and fastening it down with the provided screw and washer. 

INTERNATIONAL BUYERS: The plug-and-play installation has been confirmed on American models where the OEM plug has three conductors. If you are ordering from outside of South and North America, please check your signal plugs first. In case your plug has only two conductors, please follow the instructions found in our FAQ tab for installation.

Not sure if you need a flasher relay? CLICK HERE to find out!

Please note this item is not DOT approved and may not comply with the laws and regulations in your area. See our Terms & Conditions for more information.

  • (2) HALO-1 Signals (one per side)
  • Installation Hardware and Instructions
  • 1 Year Warranty (See our warranty policy here)
Q: Do these signals require any wiring or splicing?
A: No - these signals are completely plug and play.

Q: The signals have a 3 pin connector but my signals only have 2. How do I install?
A: Some bikes outside of North America will only have 2 pins. For bikes with a two pin signal plug you would take the pins out of the three conductor plug on the halo-1 signals. The wires in our plug have crimped on metal connectors. You will insert the halo-1 black wire crimp into your plug position that has the green wire. Then the halo-1 red wire crimp will go into the remaining slot on your bike's plug. Use electrical tape around the plug with the pins in it and make a nice tight electrical tape junction. You will be left with the green wire from the halo-1 signals. If you leave it disconnected you will not have the running light. At this point you can run a wire from the positive lead on your low beam headlight to each of the green wires on the halo-1's. This will give you running lights when the bike is on, and they will shut off with the bike. You can also opt to run a wire to the positive terminal on the battery and use a fuse and a switch on that connection. The fuse should be immediately next to the battery, and the switch should be accessible somewhere for you so you can switch the halo-1 running light on and off at your will.

Q: Do these signals have running lights?
A: Yes! In a variety of color choices.

Q: Do I need a flasher relay?
A: Installing aftermarket LED lights may cause your signals to flash faster than the OEM speed. Purchasing one of our LED flasher relays will correct this problem.

Q: How long will it take for me to receive this once I order it?
A: Our handling time is 1-2 business days, and the shipping time varies based on the shipping method selected. To learn more about shipping times, please see the articles in our Terms & Conditions regarding domestic and international shipping here.

Q: I'm located outside of the United States. Will I have to pay duties on this item?
A: Some countries charge additional fees when a package is imported and delivered to the recipient. We have no way of knowing or estimating what these fees will be. It is the buyer's responsibility to cover these additional costs.

Q: What is your return and warranty policy?
A: Please read over our policies thoroughly on our terms and conditions page BEFORE making your purchase.
TST Industries Terms and Conditions
warning

WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov

Reviews

Customer Reviews:

Average customer rating:
 
(15 reviews)  

5 Most useful customer reviews (see all reviews):
Nathan Ross
Jul 23, 2017
Lights look super cool and function as they should.

Advantages: Daytime running lamps look cool
Perfect fit in the geometry of the fairings
Easy OEM connectors make install super easy

Disadvantages: No shrink tube where wire is stripped back. Also the screws that come with it barely catch a few threads so they are very easy to strip out.
Loading...Was the above review useful to you? Yes (10) / No (1)
Guest
Got the product today. Fast shipping. Is every easy to install if you take time and look over your bike. Only need to take off the upper fairing. plug and play simple as that. Oh the relay box is under the seat not on the side fairing like the older cbr.
Loading...Was the above review useful to you? Yes (6) / No (4)
Jason
Nov 17, 2016
Excellent quality, easy-to-install....I'm very satisfied with these. They look amazing!!! GREAT JOB TST!!!
Loading...Was the above review useful to you? Yes (4) / No (2)
D. Rae
Apr 13, 2016
Just installed the flush mounts on 2013 Repsol. Looks great on the bike. I didn't buy the relay for the flashers. I dont mind the fast flash. Maybe cars will see it flash now.
Loading...Was the above review useful to you? Yes (3) / No (3)
Manjot Singh
May 19, 2017
They look great but don't work as well as described.

Disadvantages: Both LED Halo's have started flickering a year later... I wouldn't have bought it if I had known they would've only worked for a year.
##### TST MESSAGE #####
Manjot, this is an uncommon problem you're experiencing. Our customer support team will be reaching out to you to ensure you're taken care of. Please be on the lookout for an email in the next 15 minutes.
Loading...Was the above review useful to you? Yes (2) / No (5)

 
Dear Customer, TST Industries' website uses cookies to allow us to better understand how the site is being used and to enhance your shopping experience. By continuing to use this site, you consent to this policy. Click to learn more.