✕

Attention: You are purchasing closed course competition Product(s)

I acknowledge that the product(s) being purchased () was/were designed and intended for closed course competition use only. The product(s) is/are neither designed nor intended for use on public roads or land and is against Federal and State regulations to do so. By proceeding with this purchase, I , agree to only use the product(s) for closed course competition.

If an ECU tune was purchased, please send your unmodified and undamaged OEM ECU to TST Industries, located at 623 Pleasant St, Lake Helen, FL 32744.

* All fields are required Close Aknowledgement
x

FREE SHIPPING OPTION FOR DOMESTIC ORDERS:

U.S. customers are offered a free shipping option for orders with a discounted subtotal greater than $150.00 (before taxes applied). The order's shipment destination must reside within the United States of America. The free shipping options still utilize our standard postage providers and 3rd party shipping companies. Does not apply to large items such as exhausts, stands, and bodywork shipping. All terms and conditions that apply to normal orders will continue to apply to orders with a free shipping option.

NO RESTOCKING FEES:

An item returned within 30 days of purchase, that includes an accurate RMA#, in a perfectly new, unopened condition, and that complies with our other return policies, will not be charged a restocking fee.

MOST QUESTIONS ABOUT THIS PRODUCT CAN BE ANSWERED ON THIS PAGE.

The most common product related questions are answered in the tabs section on this page. Be sure to carefully read through the "Product Details", "In the Box", and "FAQs" tabs. In addition, a lot of our products have comprehensive videos demonstrating installations and product features. You can find those videos in the "Videos" tab.

Note: Some product pages may not have all the tabs mentioned above. Please read through all the available tabs to find the answers to your questions. If you still need assistance, please use the "ASK A QUESTION ABOUT THIS PRODUCT" button below the tabs section.
NO ADDITIONAL COST: You pay at the time of checkout and never have to worry again.
COVERAGE: Our Limited Extended Warranty starts on the date of purchase. It covers all manufacturer defects for our TST Exclusive products. (Products manufactured by us with the exception of our WORX products)
EXPERT HELP: As always our team is here to help. If you’re unsure about this warranty or if your product is eligible, feel free to reach out to us and we can help answer any questions you may have!
PRODUCT ELIGIBILITY: TST will offer our Limited Extended Warranty on all products manufactured by TST Industries.
EASY CLAIMS PROCESS: Simply click the “Contact Us” page and fill out the “Returns Form” to begin the warranty process. Once our team receives your email and initiates the RMA, you can send your product back to us and we will repair/replace the product at no cost as long as a manufacturer defect is found. What qualifies as a manufacturer defect? Check out our Terms and Conditions for some examples!

TST LED Integrated Tail Light Honda CBR600RR 2003-2006 / CBR1000RR 2004-2007

  • Built in turn signals with super bright LEDs.
  • 80 Super bright LEDs illuminated during the Brake signaling mode.
  • What's included in the TST LED Integrated Tail Light for the Honda CBR600RR 2003-2006 / CBR1000RR 2004-2007.
  • Smoked Lens.
  • Smoked Lens.
  • Complete Plug and Play installation.
  • Built in Signals
  • TST Industries CBR Integrated Taillight
  • Honda CBR Integrated Taillight

TST LED Integrated Tail Light Honda CBR600RR 2003-2006 / CBR1000RR 2004-2007

TST LED Integrated Tail Light Honda CBR600RR 2003-2006 / CBR1000RR 2004-2007

This TST Industries integrated taillight system gets rid of your stock light and signal assemblies and replaces them with this all inclusive unit.

Applications:

  • Honda CBR600RR | 2003, 2004, 2005, 2006
  • Honda CBR1000RR | 2004, 2005, 2006, 2007

Please note that an LED Flasher Relay or Load Balancing Resistors are needed for this tail light to flash properly. Only one LED flasher relay is required per motorcycle. Both sold separately.

Have a Question About This Product?
SKU
2003 - 2006/CBR600RR/Honda
TST LED Integrated Tail Light Honda CBR600RR 2003-2006 / CBR1000RR 2004-2007
 
Price: $64.99
LENS COLOR
Quantity

ATTENTION:

If buying this product as part of the Buy Together bundle below, define these options there.

▾

Buy Together

Make an awesome bundle with your

TST LED Integrated Tail Light Honda CBR600RR 2003-2006 / CBR1000RR 2004-2007

TST LED Integrated Tail Light Honda CBR600RR 2003-2006 / CBR1000RR 2004-2007 +
TST Low Mount Fender Eliminator Honda CBR1000RR 2004-2007 / CBR600RR 2003+ +
TST LED Low-Profile Universal Fit License Plate Light =
$115.97

Click to Show Products ▼
TST LED Integrated Tail Light Honda CBR600RR 2003-2006 / CBR1000RR 2004-2007
TST LED Integrated Tail Light Honda CBR600RR 2003-2006 / CBR1000RR 2004-2007
$64.99
Buy Together For Only $115.97
  • Product Details
  • In the Box
  • Recommended Accessories
  • FAQs

Installation on 2003 - 2006 CBR600RR

Installation on 2004 -2007 CBR1000RR

 

Features

  • Built in signals
  • Smoked lens
  • Plug and play
  • Comprised of 80 super bright LEDs

Description

This plug and play unit will provide you with a super bright brake light and signaling system while transforming your bike into a sleek, racing machine within minutes. Our installation videos will help you install this unit like a pro. We did all the work for you so you don't have to waste time or money!

FLASH RATE: Want a quick plug-and-play solution to turn signal hyperflash without wiring in the optional Load Balancing Resistors? Check out our LED Flasher Relay options on the Recommended Accessories Tab. If you don't already have one installed on your bike and don't want to mess with wiring, they provide an easy fix that saves times on install and don't produce the heat associated with resistors. Still not sure if you want an LED Flasher Relay or Load Balancing Resistors? CLICK HERE to learn more!

NON U.S. BUYERS: If you are purchasing an LED flasher relay, please verify the pin configuration before purchasing. North American models models require a two pin flasher relay, but some international models require a four pin flasher relay. If purchasing a Fender Eliminator, please note that our bracket is designed for U.S. plates and fits a hole spacing of 5.4 to 6.1 inches with 5mm hardware. It is your responsibility to verify fitment of these items before making your purchase.

Want to use this LED Integrated Tail Light in conjunction with dedicated turn signals? CLICK HERE to learn how.

Please note this item is not DOT approved and may not comply with the laws and regulations in your area. See our Terms & Conditions for more information.

  • LED Integrated Taillight
  • Installation instructions located here
  • 1 Year Warranty (See our warranty policyhere)

Please note that an LED Flasher Relay or Load Balancing Resistors are not automatically included. If you already have an LED Flasher Relay installed, you do not need another.

Load Balancing Resistors installation instructions.

If you are adding a relay to your order, be sure to select the correct relay.

The 2003-2006 Honda CBR600RR requires the GEN 2-I LED FLASHER RELAY HONDA 2003-2006 CBR600RR

The 2004-2007 Honda CBR1000RR requires the TST 2 PIN LED FLASHER RELAY GEN 2.

Q: Does this light require any wiring or splicing?
A: No. This taillight comes with plugs for both the brake and signal lights. It is a direct plug and play installation.

Q: Do I have to do any cutting?
A: No.

Q: Are there signals built in?
A: Yes. The signals are integrated into the taillight capsule.

Q: What fender eliminator and license plate light are the drop down menus referring to?
A: These items can be viewed in the 600RR and 1000RR categories of our store. You will save significantly by adding them through the drop down menus rather than purchasing them separately.
Fender Eliminator
TST LED Low-Profile Universal License Plate Light

Q: Do I need a relay?
A: You will likely need to slow down your flash rate once you install aftermarket LED lights. The optional load balancing resistors can be wired in to slow down the flash rate, but if you want a plug and play option so you don't have to do any wiring, then you will want to purchase the LED Flasher Relay. We highly recommend purchasing the relay, especially if you do not feel comfortable doing wiring on your bike.

Q: Is it bright?
A: Yes - our taillights are extremely bright. This particular taillight is designed with 80 super bright LEDs so you can be sure your light will be visible during the daytime as well as at night. This applies to both our smoked and clear lens.

Q: How long will it take for me to receive this light once I order it?
A: Our handling time is 1-2 business days, and the shipping time varies based on the shipping method selected. To learn more about shipping times, please see the articles in our Terms & Conditions regarding domestic and international shipping here.

Q: I'm located outside of the United States. Will I have to pay duties on this item?
A: Some countries charge additional fees when a package is imported and delivered to the recipient. We have no way of knowing or estimating what these fees will be. It is the buyer's responsibility to cover these additional costs.

Q: What is your return and warranty policy?
A: Please read over our policies thoroughly on our terms and conditions page BEFORE making your purchase.
TST Industries Terms and Conditions
warning

WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov

Ask a question about this product

Reviews

Customer Reviews:

Average customer rating:
 
(13 reviews)  
Add your own review

5 Most useful customer reviews (see all reviews):
Sebastian Jzubosticov
Jun 28, 2016
Ordered the integrated tail light with the fender eliminator kit, and I would highly recommend doing the same if you are pondering about doing so. The quality of the tail-light is top-notch, especially when comparing the original one beside it.

Advantages: Cleans up that hideous OEM license plate monstrosity.
Shaved off a few pounds
Increased aerodynamics, more streamlined off the back-end causing less drag.
Looks phenomenal, people often say how their license plate is "off-centered" after installing. But this all comes down to how "centered" you drilled your mounting holes in the first place.
Holes are well concealed and hardware does not interfere with internal components.
Free's up a whole lot of room allowing for easy cleaning and polishing the aftermarket exhaust pipe with no problems.
LED lights are very bright and even more so at night giving you that peace of mind and everyone else the ability to see you.
Good fitment, pretty flush!
Plug n' Play!
Very straightforward install, didn't have to read instructions but did so anyway to ensure everything was proper after job was completed. Instructions are VERY clear and precise, and anyone could easily install this by themselves even if you are not mechanically inclined.
Easier to maneuver the garage without those OEM signal lights hanging off the bike unnaturally.

Disadvantages: Cops may harass you, although plate is not obstructed whatsoever.
No longer a clicking sound when you have your signal on, but I could no longer hear it anyways having a new exhaust installed.
One shot at drilling the holes, *which they suggest using a 5/16" drill bit, but I used a 1/4" bit which allowed for a tighter fit for the bolt. Figured the template provided for drilling holes isn't accurate; you're better off sketching the designated slots being used in the bracket onto a piece of paper and translate that onto where you will be drilling the holes. Also, not necessary to take out the battery relay if you are mounting on to the battery tray.
Loading...Was the above review useful to you? Yes (3) / No (0)
Robert
Mar 3, 2016
I purchased this tail light and a flasher relay together. The install was super easy and the light is bright and easy to see! :P i wish i would have found these guys a few year ago. I totally would have bought this light over the ClearAlternatives light that blew out on me after about a year or less. Very nice construction and the plug and play makes hooking it in much cleaner and easier! and if you need it, the youtube tutorials are there with detailed step by step instructions and visual aids.

Advantages: Bright light! Inexpensive, solid construction, easy to install, detailed instructions.

Disadvantages: i wish there was a "sequential integrated tail light" option. I would have bought that one instead. But no disadvantages at all with the light!
Loading...Was the above review useful to you? Yes (2) / No (0)
Keonta
Jun 26, 2016
I recommend this tail light, I received it a lot quicker then expected.it was quick and easy to install. The light on the tail light is bright, easy to see at night and day time.
Loading...Was the above review useful to you? Yes (1) / No (0)
Robert Cook
Sep 16, 2020
This customer purchased the item at our site.
I purchased the light for my 2006 Honda CBR 1000RR. This is a good light for a great price. The install was easy and it helped to have a video of how to install it. 5 stars!
Loading...Was the above review useful to you? Yes (0) / No (0)
Joseph Stephens
Jan 1, 2020
This customer purchased the item at our site.
2004 Honda CBR1000RR - the original brake/taillight had gotten sort of burnt looking - probably from all the exhaust heat. This TST Replacement is fantastic - and has integrated turn-signals to boot - nice upgrade. Am still using the OEM turn-signals also - bought the Honda Y-Style Signal Harness Splitter to connect both old and new to the original harness. These 'double' turn-signals work great together and then you don't need to install the 'Load Resistors' to simulate the incandescent current load. Also be sure and watch the TST videos on Youtube - priceless -

Advantages: Much brighter than OEM brake/taillight - and very low power - almost no current load -
All the harness connectors are perfect - no soldering -
Smoke color lens is sleek -

Disadvantages: Installation took me several hours - but it was first time I had removed the rear one-piece fairing - and I also installed a wireless brake-signal transmitter for a helmet LED brake-light kit and replaced some missing fairing connectors - all during same installation. Removing & re-installing the one-piece rear fairing is not trivial - be sure and watch the TST video -
Loading...Was the above review useful to you? Yes (0) / No (0)
Add your own review

 
Dear Customer, TST Industries' website uses cookies to allow us to better understand how the site is being used and to enhance your shopping experience. By continuing to use this site, you consent to this policy. Click to learn more.