TST LED Integrated Tail Light Honda CBR600RR 2003-2006 / CBR1000RR 2004-2007

Ordered the integrated tail light with the fender eliminator kit, and I would highly recommend doing the same if you are pondering about doing so. The quality of the tail-light is top-notch, especially when comparing the original one beside it.

Advantages: Cleans up that hideous OEM license plate monstrosity.
Shaved off a few pounds
Increased aerodynamics, more streamlined off the back-end causing less drag.
Looks phenomenal, people often say how their license plate is "off-centered" after installing. But this all comes down to how "centered" you drilled your mounting holes in the first place.
Holes are well concealed and hardware does not interfere with internal components.
Free's up a whole lot of room allowing for easy cleaning and polishing the aftermarket exhaust pipe with no problems.
LED lights are very bright and even more so at night giving you that peace of mind and everyone else the ability to see you.
Good fitment, pretty flush!
Plug n' Play!
Very straightforward install, didn't have to read instructions but did so anyway to ensure everything was proper after job was completed. Instructions are VERY clear and precise, and anyone could easily install this by themselves even if you are not mechanically inclined.
Easier to maneuver the garage without those OEM signal lights hanging off the bike unnaturally.

Disadvantages: Cops may harass you, although plate is not obstructed whatsoever.
No longer a clicking sound when you have your signal on, but I could no longer hear it anyways having a new exhaust installed.
One shot at drilling the holes, *which they suggest using a 5/16" drill bit, but I used a 1/4" bit which allowed for a tighter fit for the bolt. Figured the template provided for drilling holes isn't accurate; you're better off sketching the designated slots being used in the bracket onto a piece of paper and translate that onto where you will be drilling the holes. Also, not necessary to take out the battery relay if you are mounting on to the battery tray.

I purchased this tail light and a flasher relay together. The install was super easy and the light is bright and easy to see! :P i wish i would have found these guys a few year ago. I totally would have bought this light over the ClearAlternatives light that blew out on me after about a year or less. Very nice construction and the plug and play makes hooking it in much cleaner and easier! and if you need it, the youtube tutorials are there with detailed step by step instructions and visual aids.

Advantages: Bright light! Inexpensive, solid construction, easy to install, detailed instructions.

Disadvantages: i wish there was a "sequential integrated tail light" option. I would have bought that one instead. But no disadvantages at all with the light!

I recommend this tail light, I received it a lot quicker then expected.it was quick and easy to install. The light on the tail light is bright, easy to see at night and day time.

I purchased the light for my 2006 Honda CBR 1000RR. This is a good light for a great price. The install was easy and it helped to have a video of how to install it. 5 stars!

Fantastic product. Bought this off ebay a few months back and it looks awesome on my bike. LED's are bright as heck makes it very visible during the day or night. Simple plug and play install. 10/10 would buy again.

Installed in my 05 600RR. Awesome product. Installs easily. Lights are super bright. Will definitely order another one if anything happens to this one.

2004 Honda CBR1000RR - the original brake/taillight had gotten sort of burnt looking - probably from all the exhaust heat. This TST Replacement is fantastic - and has integrated turn-signals to boot - nice upgrade. Am still using the OEM turn-signals also - bought the Honda Y-Style Signal Harness Splitter to connect both old and new to the original harness. These 'double' turn-signals work great together and then you don't need to install the 'Load Resistors' to simulate the incandescent current load. Also be sure and watch the TST videos on Youtube - priceless -

Advantages: Much brighter than OEM brake/taillight - and very low power - almost no current load -
All the harness connectors are perfect - no soldering -
Smoke color lens is sleek -

Disadvantages: Installation took me several hours - but it was first time I had removed the rear one-piece fairing - and I also installed a wireless brake-signal transmitter for a helmet LED brake-light kit and replaced some missing fairing connectors - all during same installation. Removing & re-installing the one-piece rear fairing is not trivial - be sure and watch the TST video -

This integrated tail light looked and felt great right out of the box, everything was constructed perfectly. The easy to follow instructions on TST’s YouTube page made it really simple to work while watching them do the install. Everything fit just like the stock setup and was very clean. The LED’s are bright and easy to see during the day.

Bought this tail light to do a fender elimination and as always TST never disappoints. Id say the TST taillight was on point with OEM quality but much brighter.

Advantages: Brighter

I just installed this light on my 06 cbr 1000rr and am truly happy with the product. It arrived quickly and the install was simply straightforward. My particular bike had damaged wires in the tail which we tricky but tst provided color coordinated institutions on wire matching which made it a snap to install. Nice product!