Choose options
Stage 2 Tune Features
- Developed specifically for the WORX Airbox Cover, WORX Velocity Stacks, TST WORX Smog Block Off Plate, and full-system Yoshimura exhaust
- Optimizes fuel maps for safe and reliable power gains
- Advanced ignition timing to improve top-end power
- Increases rev limiter by 600 RPM
- Decreased fan activation temperature
- Disables stock O2 sensor
- Optional deceleration fuel cut for less engine braking and more exhaust pops and bangs
- Increases power throughout the rev range
- 12% increase in peak power, and as much as 18% increase in power at top end before rev limiter compared to stock bike
- 6.5% increase in peak power, and as much as 11% increase in power at top end before rev limiter compared to Stage 1 configuration
- Torque increases throughout the rev range with 10-15% in the top-end
- Tuned on 93 pump gasoline
- Works with factory and aftermarket air filters
This ECU reflash was tuned using premium 93 octane pump gasoline. 93 octane should always be used when operating with this tune.
Description
With a shelf full of trophies and a national championship won on the R3 platform, we've firmly planted the TST WORX flag on the podium of R3 performance. We've taken everything we learned and applied it to the updated 2025+ model, enabling you to achieve race-winning power gains on your very own R3 or MT-03. This Stage 2 Tune was developed specially to work with our TST WORX Airbox Cover, TST WORX Velocity Stacks, a full-system aftermarket exhaust, and a the TST Smog Block Off Plate. This tune optimizes the bolt-on parts to ensure your R3 / MT-03 is taking full advantage of the additional airflow and power potential. When combined with the correct parts, you'll see massive gains through the entire rev range, with the largest being at the top-end, helping accelerate faster out of corners and separate yourself from the pack on the straightaways.
EQUIPMENT REQUIREMENT: Please be aware that this tune was developed to be paired with everything in the WORX Pack and a full system aftermarket exhaust. Failure to do so will result in poor performance that may fall out of safe zone of operation.
AFTER TUNE: Please note that a temporary check engine light will appear after flashing due to being powered out of the motorcycle. Don't stress, the check engine light will clear itself after two ride cycles and does not affect the performance or functionality of your motorcycle.
NORTH AMERICAN MARKET ONLY: Please keep in mind that this is only available for North American market Yamaha YZF-R3 / MT-03 motorcycles ONLY. All orders placed outside of the North American region will be canceled.
Stage 2 Tune Features
- Developed specifically for the WORX Airbox Cover, WORX Velocity Stacks, TST WORX Smog Block Off Plate, and full-system Yoshimura exhaust
- Optimizes fuel maps for safe and reliable power gains
- Advanced ignition timing to improve top-end power
- Increases rev limiter by 600 RPM
- Decreased fan activation temperature
- Disables stock O2 sensor
- Optional deceleration fuel cut for less engine braking and more exhaust pops and bangs
- Increases power throughout the rev range
- 12% increase in peak power, and as much as 18% increase in power at top end before rev limiter compared to stock bike
- 6.5% increase in peak power, and as much as 11% increase in power at top end before rev limiter compared to Stage 1 configuration
- Torque increases throughout the rev range with 10-15% in the top-end
- Tuned on 93 pump gasoline
- Works with factory and aftermarket air filters
This ECU reflash was tuned using premium 93 octane pump gasoline. 93 octane should always be used when operating with this tune.
Description
With a shelf full of trophies and a national championship won on the R3 platform, we've firmly planted the TST WORX flag on the podium of R3 performance. We've taken everything we learned and applied it to the updated 2025+ model, enabling you to achieve race-winning power gains on your very own R3 or MT-03. This Stage 2 Tune was developed specially to work with our TST WORX Airbox Cover, TST WORX Velocity Stacks, a full-system aftermarket exhaust, and a the TST Smog Block Off Plate. This tune optimizes the bolt-on parts to ensure your R3 / MT-03 is taking full advantage of the additional airflow and power potential. When combined with the correct parts, you'll see massive gains through the entire rev range, with the largest being at the top-end, helping accelerate faster out of corners and separate yourself from the pack on the straightaways.
EQUIPMENT REQUIREMENT: Please be aware that this tune was developed to be paired with everything in the WORX Pack and a full system aftermarket exhaust. Failure to do so will result in poor performance that may fall out of safe zone of operation.
AFTER TUNE: Please note that a temporary check engine light will appear after flashing due to being powered out of the motorcycle. Don't stress, the check engine light will clear itself after two ride cycles and does not affect the performance or functionality of your motorcycle.
NORTH AMERICAN MARKET ONLY: Please keep in mind that this is only available for North American market Yamaha YZF-R3 / MT-03 motorcycles ONLY. All orders placed outside of the North American region will be canceled.
From the garage to the street.
Rep TST: Shop ourMerch Collection
Let customers speak for us
Install video was on point for these lights on my bike. These lights make the bike look like it should have from the factory. Easy to put it and fit flawless. I also paired with the rear lights with the red running lights and their amazing.
Caen excelente, Tienes 2 opciones o las dejas que se queden prendida o las pones con las señales
Extremely easy install. No videos needed if you have common sense. Just simple plug and play.
Works great fits perfect highly recommended!!!!!!!
Very easy install been running this product for 1 month and haven’t had any problems
Very easy install been running this product for 1 month and haven’t had any problems
2006 cbr 600rr went down in a crash with these at 70mph.
1) i saw the damage the sliders took, they literally saved my forks.. my forks didnt take any nick scrape, dings, nothing bent. I mean NOTHING on my forks were damaged.
2) When disassembling the sliders, the axle nut they provide im this kit was broken. Meaning the crash was so much more violent than you can imagine. And these things did their job, held up, and protected my forks?!?!
This has been crash test verified now.
I also had the engine cover crash protector and the frame sliders from TST, they all did their job!
2006 cbr 600rr, I've bought these flush lights a couple of times over the past 6 years(give or take) and the design has changed a bit. At first I was hesitant when I received a different style, but the moment I went to install it. Oh thank you sweet baby jesus. They made it easier to install, and the lights mounted actually look better than the old style, and it appears they refined it. Another banger tst product that delivered!
2006 cbr 600rr, followed the TST video instructions and had not issue. My lights work flawlessly and give no issue or problem at all and I like it that way. This was a great and actually necessary buy. It truly did fix the flashing speed and weird behavior of the lights.
Ok, I went down in a crash, 2006 cbr 600rr. A few things:
1) these sliders work wonderfully and as they should.
2) they held up and had alot of slider left, and I was still able to get the bolt to remove the destroyed slider. (Meaning the Quality control is amazing)
3) the crash was at approx 70mph and the bike dragged for very very far. But the frame did not bend at all. There was NO frame damage at all. Not even a scrape!
4) there is no doubt in my mind without these sliders my bike would have been screwed. The extra leverage even prevented my radiator from getting obliterated.
If you're thinking about them? Get it.. they worked perfectly, So I bought another set because hell yeah.
I actually went down with this engine cover crash protector on. It 100% protected my engine cover. The amount of road that still met the protector was wild. And yes I have axle slider both for the rear and front and i have frame sliders as well. If your on the fence with getting these. Or if you think they won't add protection. Get that out of your head now. Remember a crash is violent, twist and turns, and momentum and motion doesnt care about your perceived thoughts. This was the cheapest purchase that prevents a 300+ oem cover replacement. I will by buying another one.
Upgraded the bulbs in my turn signals to LED on my 2018 DR650. All flashed at the same time when turning indicators on to either side. This solved the problem and installs in under five minutes for the cost of two cups of Starbucks.
I've bought several products from TST and everything has been exceptional. This time around I bought the TST brake light modulator type 1 for my 2021 Kawasaki Vulcan S 650. Love the plug and play, and it works simply amazing.
Compared to some cheap $50 Amazon ones these will definitely save your bike was worth every penny took a little bit to install because I wanted to be careful and make sure it fit properly. Make sure you watch the video they have before you try and put these on.
Installed these today along with the tail light and low tag mount. Great product super bright and matching the scanning of the tail light!! Make sure to get the flasher relay to keep your turns blinking properly though. All of their install videos are spot on making it a simple change.
