Purchased this relay to adjust the speed of the aftermarket LED signals on my '15 R3. The one relay brought the speed back down to normal for fronts and rears; plus it was incredibly easy to install. Awesome, awesome product.

Advantages: No need to wire-in resistors; completely plug-and-play

Disadvantages: Yeah...I got nothin'

So disappointed. These signals are DIM, some of the weakest LEDs I've seen. Literally standing right in front of the bike, these are barely visable, so nevermind from afar. I'm taking these off and putting the OEM signals back on.

Advantages: Look cool in the dark when you can at least see them.

Disadvantages: TERRIBLE in all other scenarios. Non-visible, so what's the point...

-------------------TST INDUSTRIES RESPONSE BELOW-------------------
TST customer service has been in contact with this customer and we have cleared up any possible confusion.

These signals are incredible! The fit is flush with the fairing and the LEDs are very bright. I ordered them with a clear lens and orange led and the bike looks very clean. The installation was a breeze. You take three minor screws off the inside panel of the front fairing and it's all plug and play from there. This youtube video will show you what to do even though it's for a different flushmount signal, the install is nearly identical: https://youtu.be/89jDw2WRZ5I.
##TST INDUSTRIES COMMENT##
Thanks for the review, Brian! We simply wanted to acknowledge an installation video for the HALO-GTR system is anticipated for upload between 2/13 and 2/17. Thank you for helping fellow riders in the meantime but recognizing the install is 1) simple, and 2) similar to the standard LED flushmount's install.
Cheers!

Advantages: Plug and play flushmount look with bright LEDs and always on signal markers. Looks incredible and easy to install.

Disadvantages: When installing, make sure you tuck the inside panel back into the fairing before setting the rivets back in place. The wire on the right side when you sit on the bike is a little long and may rest on the radiator cap. I recommend using some electrical tape and taping it to the other wires in the run to lift if off your radiator.

The molded plastic undertail fits perfectly and looks great! Definately a great addition to my bike!

Could benefit of a wider plate holder (to fit wider plate) and wider OEM flasher bracket to clear plate. only 1 inch would be required.

Advantages: Ease of installation. Videos are easy to follow. Perfect fitment.

Disadvantages: Needed to cutout my plate since I'm in Quebec (canada) to clear OEM flasher. Drill new holes to accommodate quebec plate.
Although I was expecting to do so as it was mentioned.

Great design, smooth plug & play installation, incredible price. The videos made it easy to do installation and the smoked taillight looks perfect on my black FZ-07. The build quality was top notch as well.

Advantages: Cleaner and more aggressive look for the tail end, extremely competitive price-point

Did exactly what it was meant to do, no more hyper flash after installing the LED flush mount signals. I did not adjust mine and left it at the rate it was preset to coming from TST. Installation wasn't enjoyable, but wasn't difficult. Would recommend! 5 Stars!


Advantages: Losing hyper flash means you wont give other motorists seizures

Disadvantages: Losing hyper flash also means no more strobe light functionality for dance parties :(

Best looking sliders out there IMO- these should be OEM. Thankfully I haven't had to use them yet. For California riders, note that you will need to move the emissions canister. This is rather trivial- You'll have to take the canister and sensor out of the mounting bracket. I used two 18" wire ties (~.35" wide) to strap the canister to the slider's mounting bracket. It actually looks like the radiator has more room to breathe!

Advantages: Best looking slider for this bike by far. The form factor and the parts appear top notch. Installation isn't rocket-science.

Disadvantages: While the installation is straight-forward (watch their video), it can be tedious and you have to keep track of all of the screws! This will apply to any frame slider install though.

Fundamentally flawed execution. The impact absorption from what I'm reading should be better than stock due to material composition used.

However, one of the reasons the stock bar ends are weighted is for vibration dampening.

Honestly, keep the stock bar ends on. They are there to absorb a fall while also dampening vibrations.

Also, the throttle side with the spacer causes a gap that does not match the other side so its not symmetrical.

Advantages: Great price, the aluminum looks and feels great

Disadvantages: Lightweight...too lightweight. Increases vibration in handlebars.

Bought these letters along with four or five other parts, they told me around 10 days for international shipping...... within 4 days it was at my door! Levers are an amazing fit, look, and feel. Only took about 15 minutes to switch out both levers and nothing beats the price so far that I’ve noticed

Advantages: Lighter, smaller, stronger, and better looking than stock

Disadvantages: Barely had time to crack a beer before they were installed

I bought these two years ago and now the clear plastic looks crusty and yellow. They are very easy to install but don’t last long.