TST MECH-GTR Front LED Turn Signals for Select FZ/MT Yamaha Models

These make the bike look so much better. I also changed out the rear for the integrated light and it is night and day difference from those awful OEM signals.
My only callout here is that in the video the running lights appear to illuminate the entire signal, not just the ring around the base, like what I got. Kind of seems misleading and I don't know why TST would mislead like that.

Advantages: Very bright. Looks awesome. Easy to adjust flash rate with relay installed.

Disadvantages: Running lights are only the ring at the base of signal, barely visible during the day. The running lights looked brighter in the video.

I purchased these signals with the "hyper white" running lights. Overall I'm very pleased with the upgrade to aesthetics, and install was... not the most complicated thing I've ever done, though it was mildly time consuming. I'm only giving these a 4-star rating due to the fact that not much of the running light actually glows through the signals. Most of the light is saturated through the opaque part of the base, and doesn't really make it through the rest of the module. I'll have to see if others have the same results.

As always, these aren't DOT approved. If you live in a state like Commiefornia you might have problems passing inspection.

Advantages: Purely an upgrade to aesthetics

Disadvantages: Technically not road legal

These turn signals are great overall. Install is very straight forward and fitment is as good as stock. Much better looking then OEM because of size and design. With that being said, they are actually brighter when the turn signal is activated.

The only reason this isn't a 5 star review is because the Hyper White light purchased to light up the Halo doesn't do so. It lights up the vertical clear portion but not the halo it's self

Advantages: -easy install
-great fit
-looks awesome
-brighter then OEM

Disadvantages: - Halo doesn't actually light up

Replaced my stock signals on a 2018 MT-07 with these units. They are a huge improvement aesthetically over the stock units. They were also easy to install, as was the new signal relay. As per the video, I cut away the small ridges in the cowlings without any issues. I also trimmed one tab on the clip. One of the units still had significant movement in it after installation, even though the clip was as tight as it would go. So I cut a thin rubber gasket to go between the clip and the cowling. Worked great! I rated a 4-star only because I had to do this. I just installed today, and have not yet ridden with them. But they appear to be a great bang for the buck add on. Would recommend!

Advantages: Look great. Relatively inexpensive.

Disadvantages: None at this time.

Great Looking turn signals! Bright as heck. Only issues i had is that the clip that holds the light to the mount is very weak. Garage space is limited so when your scooting by your bike and bump into the turn signal it will back out the clip. You can push it back it but it dose not hold with the same amount of force as new.

Advantages: Looks Cool
Bright


Disadvantages: Sticks out too much
Clip that holds it in needs improvement

These are pretty awesome. (2) things I had issue with. I have a 2019 MT09, the left side was exactly as the video shows. The right side, the wire is about 6 inches longer than the video and it’s looped pretty crazy through the interior of the bike. You have to unplug it to get it out and it’s wrapped pretty tight. The other issue is the ratchet fitting. I tried using the included o-rings, and I’m pretty sure they are going to fall off dinner or later. Probably should have not used the o-ring. Other than those 2 small issues, as always they are exactly what I wanted and look phenomenal. Tst definitely puts out great products. This was the only time a video wasn’t spot on also. And it really wasn’t that different, just the wiring on one side for 2019 MT09.

I'm pretty happy with the signals though I will admit it wasn't exactly what I was expecting. They do function just fine but it's not that high quality led light that you would be expecting.

Advantages: Function properly and look way better than OEM

Disadvantages: They're not the highest quality out there in terms of brightness and material

I love the look of the lights and the function great. I priced the lights 6 months ago. I just started have an issue with the small 2 plug connector for the running lights. Since there is no connector seal for the wiring. The wires started corroding and the lights stopped working. I would like to see a sealed connector in the future but other than that I would highly recommend these for function and looks

Advantages: Looks, function, ease of install

Disadvantages: No sealed connector for running lights.