TST Spooled Captive Chain Adjusters for Honda Grom 2022+

Just do yourself a favor and immediately buy these. They are worlds away better than the stock junk and they are more affordable than some of the other manufacturers. The only ones I would compare on the same level would be the MNNTHBX ones and but the TST are less expensive for an equally great product. They make chain adjustments, and just life in general, a thousand percent easier. My chain wasn't adjusted properly from the dealer on one of my groms and when we swapped these out I had it perfect in moments, these have so many more marks on them for adjustment that it is much, much easier to get everything aligned perfectly and you know that if the marks on both sides match that you're done. I understand that Honda doesn't do this because they're saving every penny they can, but this is really the way the bike should have come to begin with. Also, having the spools to use a spool stand makes working on the bike for other things way easier and safer too. Really you can't go wrong with these and they deliver way more value than they cost.

Advantages: You can use a spool stand, you can actually adjust your chain and get everything lined up, they're super super easy to install and they'll save you so much time and effort and frustration in the future. They also are much easier to make fine adjustments on because you adjust them with an allen instead of two nuts with no marks like the stock adjusters.

Disadvantages: Like the other person said, you can't go wrong with these, the only disadvantage is that Honda didn't do it right like this from the factory.

Great chain adjusters for the 22’ Grom. Couple things to note… The clearance, as stated on the TST YouTube page, is very very tight… but it works and fits just fine. Just be patient and work in the adjusters slowly and carefully. I just wiggled them in and then I actually used a soft rubber mallet to help the adjusters all the way in the swingarm. Adjustments were so simple, partly due to the the ease of the big axle adjuster lines… but more so because it only took a Allen key to adjust how far forward/backwards you needed the axle. It took only a min to line up the axle based on the chain.

Advantages: Quick and easy chain adjustments.

Disadvantages: None.

Oh, you got a new gen Grom? Buy these. Buy these right now. Look, you will be adjusting your chain. It has to be done. These chain adjusters 100% fix the horrors of adjusting the chain yourself with the stock setup. With the added stand supports, adjusting you chain will now take literally 2 minutes and you will have to use far, far fewer cuss words. Buy these right now. Trust me.

Advantages: Solves all the worlds problems.

Disadvantages: It’s too easy to adjust the chain now. Almost too easy.

Makes chain adjustments so easy. The install was also pretty easy. It also makes the bike look cooler

Advantages: Cuts down chain maintenance time

Disadvantages:

The adjusters were very easy to install when following the YouTube video and made chain adjustment a lot easier and confidence inspiring with the added markings. I ran into some troubles but TST email support was very quick to respond.

I live in Canada and occasionally ride in the winter, so I also took this opportunity to spray some Fluid Film down my swingarm.

As for the TST YouTube video, I believe their rear axle bolt/nut were inserted the wrong direction and they instructed to not install the washers. However, the pictures in the product listing show the correct bolt/nut direction and show the factory washers retained. I kept the washers without a problem.

Advantages: Looks pretty sleek and much less frustrating when adjusting chain slack.

Disadvantages: Tricky to remove but you shouldn't have a reason to remove them.

Just installed this on my 2023 Honda Grom. It's a 110% improvement over the stock chain adjuster. I would definitely recommend. Another great TST Industry product.

Easiest and best mod, awesome product, very well manufactured.