Simple! Just follow, or watch Bart's instructions. Very easy install and it looks 100% better!

Advantages: Sleek. Looks better than stock.

Disadvantages: None that I have found.

Must have item! Once you guys had this in stock, Will had to have it! Love it dudes!

Advantages: Nice deep roar now! Makes enough noise that you know this didnt come from the factory! Picked up a bit of speed also. Bart has made this easy to follow to install (really not needed)

Disadvantages: I haven't found one!

Bought this along with the TST 2 pin flasher relay and the Elite 1 fender eliminator. This is a must have to make the Grom sleek looking! Thanks Bart for your install video.

Advantages: Sleek, just looks much much better.

Disadvantages: None!

A straight forward install that doesn’t take too long at all either. The only thing that had me scratching me head was the license plate mount and the lack of room between the signal light threads and the bolt threads that hold the bracket in place. There’s really not a lot of room to work as the lights and mounting bolt damn near touch. Since the kit I got came with 6 washers I ended up doubling up the washers on the front of the license plate (basically made them spacers) to push to bolt further outward to give me more room behind the plate where the signal light comes through. One washer and the nut on the backside and it fit snuggly and didn’t feel like a ‘jerry rig’. The included Signal Plug Adapters allow this project to truly be a plug and play install. The Smoke BL6 lights I got are pretty slick looking and super bright. Like, my god those are bright signal lights, bright. The bright amber LED’s definitely set themselves apart from the red glow of your running/brake light.

Advantages: Super bright LED’s make no mistake your intention to turn.
Easy plug and play installation makes me feel like I know what I’m doing for once.


Disadvantages: -The license plate bracket can be a little tricky when you’re trying to tighten down the nut on the signal light and trying to keep it straight, even and flat. It’s easy to have one light lined up perfectly and the other looking a bit more up or down, like an iguana’s eye balls.
-Can’t be used in conjunction with the TST Programable and Sequential Tail Light AND utilizing its signal light function. You can still use that same tail light for running/brake lights, but you sacrifice utilizing the tail lights signal function. No way to split and splice to use both tail light signals and a separate set of signals.

This light really is that easy to install. Just plugged mine in last night and the hardest part is just remembering where all those push pin connectors go. One note, my light did not have the same connectors on the light, but instead they are the Yamaha 3 pin connectors just like on the Y Style harness you can find on this TST website. However, included with the light was a set of pig tail connectors that have the OEM plug that plugs into the 3 pin, and on the other side is the bulkier plug that snaps right into the bikes wire harness. It’s a small almost mundane detail and just as easy as the rest of the install, but figured it was worth noting. The light is bright, the different modes are pretty cool and add that extra amount of “heads up” to drivers behind you.

Advantages: Bright light, flashing modes add visibility to dumb drivers nearby, install is identical to the video instructions which makes this install a breeze, looks perfect

Disadvantages: The biggest bummer is that you can’t use this taillight in conjunction with separate rear signal lights and maintain the signal function in the tail light. You can plug the triangular plug into the bike’s wire harness and not use the signal light wires (leave unplugged and tucked away), utilize a TST Signal Plug Converter and then plug in your separate signal lights. This may have to be your option depending on your local DOT regs and laws.

Man, I’ve been dealing with Revzilla.com since I bought my first motorcycle and you might as well just order directly from China with those wait times before they ship. Buying directly from TST has been absolutely incredible. Shipping was fast, customer service was so helpful, and it’s not very often you feel like you get what you’re paying for, but I really do with this product and their license plate bracket.

Advantages: Really cleans up the tail of the bike.

Disadvantages: Takes a few minutes to install, but nothing crazy.

Wish I got these before my crashes. LOL. Better late than never. At least I'm ready for future mishaps. I'm pretty sure these would be solid protection.

I opted to install the frame slider after the fairing went on for ease of installation. The only drawback was I wouldn't be able to utilize the cap. The trade off is worth it if you work on your own bike a lot.

Advantages: Excellent installation video. All TST videos are great.
Looks great and blends in with bike.

Disadvantages: Takes a little longer to install than no-cut versions BUT it's totally worth it.

Got these bar ends with the anodized red rings. The color is exactly what I wanted. Looks great on the bike with the protection it deserves.

Advantages: Easy install.

Disadvantages: If you get colored anodized rings, you'll get three colors - the black delrin piece, the color of your choosing and the stainless steel color of the insert. Probably won't be too bad if rings were all black or if insert protruding from bar end was the same diameter.

After receiving this I watched the video installation 1X, gathered my tools, downloaded the pdf supporting document for reference, laid out the parts, did the same thing Bart did, removed host parts, installed the new parts, torqued to spec all in

Advantages: Bart

Disadvantages: None noted...

Probably the most frustratingly designed products I've bought from TST for my Grom. They look damn good though.

Advantages: Way nicer looking than the stupid plastic crap that the Grom came with. Good quality. Love the gold pieces. Won't fall out unless it explodes, I bet.

Disadvantages: Poorly designed for assembly, doesnt simply twist together to make things easy, they keep falling apart. The screws didnt want to bite without an unnecessary amount of force.

Didn't come with instructions, though the design is straightforward.