I acknowledge that the product(s) being purchased () was/were designed and intended for closed course competition use only. The product(s) is/are neither designed nor intended for use on public roads or land and is against Federal and State regulations to do so. By proceeding with this purchase, I , agree to only use the product(s) for closed course competition.
Replace the large stock fender with a clean and incredibly bright LED Integrated Tail Light and Fender Eliminator System. Our easy to install kit comes with everything you need to give your Kawasaki KLX250S / SF the upgrade it needs to stand apart from the rest of the crowd!
Want to add 3 different brake light modes to this tail light? Check out the TST Brake Light Modulator for an easy to install solution that enables standard, pulsar, and strobe alert light modes on this TST LED Integrated Tail Light.
Applications:
Please note that an LED Flasher Relay or Load Balancing Resistors are needed for this tail light to flash properly. Only one LED flasher relay is required per motorcycle. Both sold separately.
Click to Show Products ▼
Features and InstallationAdjustable bracket InstallationLED Integrated Tail Light Features
License Plate Bracket Features
DescriptionDitch the huge stock fender, tail light, and turn signals all in one easy to install upgrade! Our Fender Eliminator and LED Integrated Tail Light System cleans up the tail section of your Kawasaki KLX250S / KLX250SF by transforming the rear from an ugly stock plastic fender to a sleek, low-profile, and modern setup. The integrated tail light is comprised of 66 super bright LEDs and features a unique perimeter lit running light and bright built-in signals. Our Standard license plate bracket features a fixed position and is constructed of laser cut steel with a black powder coat finish. If you wish to customize the angle of your license plate, choose our CNC machined aluminum Adjustable bracket that features a durable black anodized finish. Both brackets are designed to be strong and sturdy without adding unnecessary weight to your Kawasaki. Every integrated tail light is plug-and-play to ensure a quick and easy installation to get you back on your Kawasaki KLX250S / SF as soon as possible! FLASH RATE: An LED Flasher Relay or Load Balancing Resistors are needed for this tail light to flash properly. If you don't already have an LED Flasher Relay installed on your bike and you want to avoid the hassle of wiring in load balancing resistors, check out our plug-and-play TST Gen2 LED Flasher Relay and ensure your new LED lighting works properly. Still not sure if you want an LED Flasher Relay or Load Balancing Resistors? CLICK HERE to learn more! NON U.S. BUYERS: Our fixed bracket is designed for U.S. plates and fits a hole spacing of 5.09 to 6.1 inches with 5mm hardware, while the adjustable bracket fits a hole spacing of 5.2 to 6.29 inches with 5mm hardware. It is your responsibility to verify fitment before making your purchase. Please note this item is not DOT approved and may not comply with the laws and regulations in your area. See our Terms & Conditions for more information.
Please note that an LED Flasher Relay or Load Balancing Resistors are not automatically included. If you already have an LED Flasher Relay installed, you do not need another. **Please be aware that our 1 Year Warranty does not cover physical damage caused by off-road use. Q: Does this light require any wiring or splicing?
A: No. This tail light is completely plug-and-play, meaning that there is no need for wire cutting, splicing, or soldering. Just plug it in and you're done. Q: Do I have to do any cutting? A: No - no permanent modifications to your Kawasaki KLX250S / SF are required. Q: Do I need a relay? A: Installing this tail light will cause your signals to flash at a faster rate than what is considered to be normal. The optional load balancing resistors can be wired in to fix the problem, or if you want a plug and play option that doesn't require any wiring, then you will want to purchase the relay. In our opinion, we highly recommend purchasing the relay, especially if you do not feel comfortable doing wiring on your bike. It's easy to install and we even have an installation video for it in our Videos Tab. Q: Is it bright? A: Yes - our tail lights are extremely bright. This particular tail light is designed with 66 super bright LEDs so you can be sure your light will be visible during the daytime as well as at night. This goes for both our clear and smoked lens options. Q: How long will it take for me to receive this once I order it? A: Our handling time is 1-2 business days, and the shipping time varies based on the shipping method selected. To learn more about shipping times, please see the articles in our Terms & Conditions regarding domestic and international shipping here. Q: I'm located outside of the United States. Will I have to pay duties on this item? A: Some countries charge additional fees when a package is imported and delivered to the recipient. We have no way of knowing or estimating what these fees will be. It is the buyer's responsibility to cover these additional costs. Q: What is your return and warranty policy? A: Please read over our policies thoroughly on our terms and conditions page BEFORE making your purchase. TST Industries Terms and Conditions |
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov