I acknowledge that the product(s) being purchased () was/were designed and intended for closed course competition use only. The product(s) is/are neither designed nor intended for use on public roads or land and is against Federal and State regulations to do so. By proceeding with this purchase, I , agree to only use the product(s) for closed course competition.
Ditch the stock fender and brake light for a sleek undertail system that overhauls the tail section of your Yamaha XSR900.
What's included:
Already have our Elite-1 Adjustable Fender Eliminator and want to upgrade? Don't worry, we've got you covered. Simply select the "No, Thanks" option when choosing a license plate bracket and reuse your existing TST Elite-1 Fender Eliminator hardware with the new LED integrated tail light and undertail kit.
Applications:
Yamaha XSR900 | 2016, 2017, 2018, 2019, 2020, 2021
Please note that an LED Flasher Relay or Load Balancing Resistors are needed for this tail light to flash properly. Only one LED flasher relay is required per motorcycle. Both sold separately.
Click to Show Products ▼
Installation VideoFeatures
DescriptionDitch the stock fender, turn signals, and top-mounted tail light with one easy to install modification. Our TST LED Integrated Tail Light and Fender Eliminator kit features an undertail design that tucks the LED integrated tail light under the rear mud flap, creating a clean and sophisticated look, while the texture-matched ABS plastic alloy fender closeout fills the fender gap left behind from ditching the stock tail light. You can pick between our Standard fixed-position license plate bracket or upgrade to our black anodized CNC machined aluminum Adjustable bracket. Each kit includes an XSR900 specific wire harness that enables plug and play wiring, meaning you don't have to spend hours in the garage cutting or splicing wires, simply plug in your new kit and you're done! Already have our Elite-1 Adjustable Fender Eliminator and want to upgrade your tail light? Don't worry, we've got you covered. Simply select the "No, Thanks" option when choosing a license plate bracket and reuse your existing TST Elite-1 Fender Eliminator hardware with the new undertail kit. NON U.S. BUYERS: Please note that our bracket is designed for U.S. plates and fits a hole spacing of 5.4 to 6.1 inches with 5mm hardware. It is your responsibility to verify fitment before making your purchase. FLASH RATE: An LED Flasher Relay or Load Balancing Resistors are needed for this tail light to flash properly. If you don't already have an LED Flasher Relay installed on your bike and you want to avoid the hassle of wiring in load balancing resistors, check out our plug-and-play TST Gen2 LED Flasher Relay and ensure your new LED lighting works properly. Still not sure if you want an LED Flasher Relay or Load Balancing Resistors? CLICK HERE to learn more! Important Note: If you wish to retain the stock key cover, modification to that component is required. Don't stress though, Bart demonstrates the procedure in the step-by-step installation video. Please note this item is not DOT approved and may not comply with the laws and regulations in your area. See our Terms & Conditions for more information.
Please note that an LED Flasher Relay or Load Balancing Resistors are not automatically included. If you already have an LED Flasher Relay installed, you do not need another. Q: Do I have to do any drilling?
A: It depends - If you wish to retain your stock key cover, that component will need to be trimmed and drilled in order to be reused with this kit. Don't worry though, Bart demonstrates the process in great detail within our installation video. Q: Is the license plate light included? A: No - many of our customers have expressed that they prefer to not have a license plate light, so we sell our TST LED Low-Profile License Plate Light separately. Q: Is the license plate optional? A: Yes - due to a large number of XSR900 customers already having our compatible Elite-1 Fender Eliminator, we wanted to provide an option for them that didn't require them to purchase the same components twice. If you're not one of those customers, add in your preferred license plate bracket so you can mount your license plate. Q: How long will it take for me to receive this once I order it? A: Our handling time is 1-2 business days, and the shipping time varies based on the shipping method selected. To learn more about shipping times, please see the articles in our Terms & Conditions regarding domestic and international shipping here. Q: I'm located outside of the United States. Will I have to pay duties on this item? A: Some countries charge additional fees when a package is imported and delivered to the recipient. We have no way of knowing or estimating what these fees will be. It is the buyer's responsibility to cover these additional costs. Q: What is your return and warranty policy? A: Please read over our policies thoroughly on our terms and conditions page BEFORE making your purchase. TST Industries Terms and Conditions |
WARNING: Cancer and Reproductive Harm - www.p65warnings.ca.gov