Features
- Smoked or clear lens
- Built in turn signals
- 4 programmable functions (optional)
- Plug and play wiring
- 20 minute installation
- 80 superbright LEDs
- Includes FREE exhaust lowering link kit for better tail light visibility
Description
This TST Industries taillight system does away with the ugly stock light and signals assembly and is a direct fit within the tail so the installation is a snap (requires trimming off a little of that black plastic closeout under the tail). The new programmable version features the regular brake and signal functions of our original light and adds the option for having a scanning signal and strobe brake. The selector switches are built into the housing of the taillight in a location that remains accessible after installation.
This is our own design, a product of American engineering, and is sold only through our stores and a few authorized dealers. Super Street Bike magazine featured this product in their "Mod of the Month" article in April 2012 (see article in our photos).
FLASH RATE: An LED Flasher Relay or Load Balancing Resistors are needed for this tail light to flash properly. If you don't already have an LED Flasher Relay installed on your bike and you want to avoid the hassle of wiring in load balancing resistors, check out our plug-and-play TST Gen2 LED Flasher Relay and ensure your new LED lighting works properly. Still not sure if you want an LED Flasher Relay or Load Balancing Resistors? CLICK HERE to learn more!
NON U.S. BUYERS: If you are purchasing an LED flasher relay, please verify the pin configuration before purchasing. North American models models require a two pin flasher relay, but some international models require a four pin flasher relay. It is your responsibility to verify fitment of these items before making your purchase.
Please note this item is not DOT approved and may not comply with the laws and regulations in your area. See our Terms & Conditions for more information.
Free Exhaust Lowering Link Kit Application Chart
NOTE: This kit does NOT include an exhaust mount. Exhausts mounts are included with your exhaust purchase and must be purchased from the exhaust manufacturer.
Don't know which kit you need? Use the chart below to find out!
| Exhaust |
Kit |
| Yoshimura RS-5 |
3 Link |
| Honda Stock |
3 Link |
| Toce |
2 Link |
| Two Brothers |
2 Link |
| Jardine |
2 Link |
| Akrapovic |
3 Link |
| Leo Vince |
3 Link |
| HyperFlo |
2 Link |
| G and G |
2 Link |
| MIVV X-Cone |
2 Link |
| KR Tuned |
2 Link |
Don't see your exhaust on this list? If your exhaust has a midpipe mount, then you will need a 3 link kit. Otherwise, a 2 link kit is all you need.
- LED Integrated Tail Light
- Free Exhaust Lowering Link Kit
- 1 Year Warranty (See our warranty policy here)
Please note that an LED Flasher Relay or Load Balancing Resistors are not automatically included. If you already have an LED Flasher Relay installed, you do not need another.
Q: Does this light require any wiring or splicing? A: No. This taillight comes with plugs for both the brake and signal lights. It is a direct plug and play installation.
Q: Do I have to do any cutting? A: Yes - there is a need to trim off a little of that black plastic closeout under the tail. We provide instructions on how to do this.
Q: Are there signals built in? A: Yes. The signals are integrated into the taillight capsule.
Q: Do I need a relay? A: You will likely need to slow down your flash rate once you install aftermarket LED lights, so we recommend installing an LED flasher relay (only one relay is needed per motorcycle) or resistors. If you want a plug and play option so you don't have to do any wiring, then you will want to purchase the relay. We highly recommend purchasing the relay, especially if you do not feel comfortable doing wiring on your bike.
Q: Is it bright? A: Yes - our taillights are extremely bright. This particular taillight is designed with 80 super bright LEDs so you can be sure your light will be visible during the daytime as well as at night. This applies to both our smoked and clear lens.
Q: How long will it take for me to receive this once I order it? A: Our handling time is 1-2 business days, and the shipping time varies based on the shipping method selected. To learn more about shipping times, please see the articles in our Terms & Conditions regarding domestic and international shipping
here. Q: I'm located outside of the United States. Will I have to pay duties on this item? A: Some countries charge additional fees when a package is imported and delivered to the recipient. We have no way of knowing or estimating what these fees will be. It is the buyer's responsibility to cover these additional costs.
Q: What is your return and warranty policy? A: Please read over our policies thoroughly on our terms and conditions page BEFORE making your purchase.
TST Industries Terms and Conditions
Have a Question About This Product?
Was the above review useful to you? 
