Choose options
Product Feature Episode and Installation Demonstration
Features
-
Adds 3 light modes to your motorcycle's tail light
- Brake light modes: Strobe Alert, Intermittent Pulsar, and Pulsar
- Plug and play wire harness eliminates the need for wire cutting, splicing, or soldering
- Removable capsule cap enables easy selection of your desired light mode
- Provides a valuable safety feature that demands attention while you are slowing down or coming to a stop
- Simple and easy installation
- Handles up to four amperes of current
Description
Do you wish your OEM Yamaha Raider brake light had different light modes? We've got you covered! Our TST Brake Light Modulator is your plug and play solution to adding an important safety feature to your cruiser's brake light. This modulator enables 3 selectable brake light modes to your tail light - standard, strobe alert, or pulsar brake alert. Slowing down for a stop or hard emergency braking can put you as a rider in a lot of danger, so it's important to do everything you can to make sure your brake light grabs the attention of the driver behind you. We've made installation a quick and easy process with our plug-and-play harness, meaning that there's absolutely no cutting, splicing, or soldering required.
NON U.S. BUYERS: Fitment has only been verified on North American market Yamaha Raider models. It is your responsibility to verify fitment before making your purchase.
Please note this item is not DOT approved and may not comply with the laws and regulations in your area. See our Terms & Conditions for more information.
Product Feature Episode and Installation Demonstration
Features
-
Adds 3 light modes to your motorcycle's tail light
- Brake light modes: Strobe Alert, Intermittent Pulsar, and Pulsar
- Plug and play wire harness eliminates the need for wire cutting, splicing, or soldering
- Removable capsule cap enables easy selection of your desired light mode
- Provides a valuable safety feature that demands attention while you are slowing down or coming to a stop
- Simple and easy installation
- Handles up to four amperes of current
Description
Do you wish your OEM Yamaha Raider brake light had different light modes? We've got you covered! Our TST Brake Light Modulator is your plug and play solution to adding an important safety feature to your cruiser's brake light. This modulator enables 3 selectable brake light modes to your tail light - standard, strobe alert, or pulsar brake alert. Slowing down for a stop or hard emergency braking can put you as a rider in a lot of danger, so it's important to do everything you can to make sure your brake light grabs the attention of the driver behind you. We've made installation a quick and easy process with our plug-and-play harness, meaning that there's absolutely no cutting, splicing, or soldering required.
NON U.S. BUYERS: Fitment has only been verified on North American market Yamaha Raider models. It is your responsibility to verify fitment before making your purchase.
Please note this item is not DOT approved and may not comply with the laws and regulations in your area. See our Terms & Conditions for more information.
From the garage to the street.
Rep TST: Shop ourMerch Collection
Let customers speak for us
Install video was on point for these lights on my bike. These lights make the bike look like it should have from the factory. Easy to put it and fit flawless. I also paired with the rear lights with the red running lights and their amazing.
Caen excelente, Tienes 2 opciones o las dejas que se queden prendida o las pones con las señales
Extremely easy install. No videos needed if you have common sense. Just simple plug and play.
Works great fits perfect highly recommended!!!!!!!
Very easy install been running this product for 1 month and haven’t had any problems
Very easy install been running this product for 1 month and haven’t had any problems
2006 cbr 600rr went down in a crash with these at 70mph.
1) i saw the damage the sliders took, they literally saved my forks.. my forks didnt take any nick scrape, dings, nothing bent. I mean NOTHING on my forks were damaged.
2) When disassembling the sliders, the axle nut they provide im this kit was broken. Meaning the crash was so much more violent than you can imagine. And these things did their job, held up, and protected my forks?!?!
This has been crash test verified now.
I also had the engine cover crash protector and the frame sliders from TST, they all did their job!
2006 cbr 600rr, I've bought these flush lights a couple of times over the past 6 years(give or take) and the design has changed a bit. At first I was hesitant when I received a different style, but the moment I went to install it. Oh thank you sweet baby jesus. They made it easier to install, and the lights mounted actually look better than the old style, and it appears they refined it. Another banger tst product that delivered!
2006 cbr 600rr, followed the TST video instructions and had not issue. My lights work flawlessly and give no issue or problem at all and I like it that way. This was a great and actually necessary buy. It truly did fix the flashing speed and weird behavior of the lights.
Ok, I went down in a crash, 2006 cbr 600rr. A few things:
1) these sliders work wonderfully and as they should.
2) they held up and had alot of slider left, and I was still able to get the bolt to remove the destroyed slider. (Meaning the Quality control is amazing)
3) the crash was at approx 70mph and the bike dragged for very very far. But the frame did not bend at all. There was NO frame damage at all. Not even a scrape!
4) there is no doubt in my mind without these sliders my bike would have been screwed. The extra leverage even prevented my radiator from getting obliterated.
If you're thinking about them? Get it.. they worked perfectly, So I bought another set because hell yeah.
I actually went down with this engine cover crash protector on. It 100% protected my engine cover. The amount of road that still met the protector was wild. And yes I have axle slider both for the rear and front and i have frame sliders as well. If your on the fence with getting these. Or if you think they won't add protection. Get that out of your head now. Remember a crash is violent, twist and turns, and momentum and motion doesnt care about your perceived thoughts. This was the cheapest purchase that prevents a 300+ oem cover replacement. I will by buying another one.
Upgraded the bulbs in my turn signals to LED on my 2018 DR650. All flashed at the same time when turning indicators on to either side. This solved the problem and installs in under five minutes for the cost of two cups of Starbucks.
I've bought several products from TST and everything has been exceptional. This time around I bought the TST brake light modulator type 1 for my 2021 Kawasaki Vulcan S 650. Love the plug and play, and it works simply amazing.
Compared to some cheap $50 Amazon ones these will definitely save your bike was worth every penny took a little bit to install because I wanted to be careful and make sure it fit properly. Make sure you watch the video they have before you try and put these on.
Installed these today along with the tail light and low tag mount. Great product super bright and matching the scanning of the tail light!! Make sure to get the flasher relay to keep your turns blinking properly though. All of their install videos are spot on making it a simple change.
